BorgWarner s200sx-e in machined k26 housing possible?

General automotive discussion

BorgWarner s200sx-e in machined k26 housing possible?

Postby Neacail » Fri Dec 22, 2017 8:06 pm

I keep looking at these, and they seem like a good option for the 20v I5 (before y'all say EFR or GT, I'd rather spend the extra money on rods and gaskets and such.

http://www.jegs.com/i/BorgWarner/156/12 ... 9/10002/-1


It looks kind of like this could be made to fit a modified K26 exhaust housing, but I'm not totally sure. Anyone have any experience with this? Just looking at other budget options besides getting a 71mm wheel for my k24 7400. I had read somewhere (here, I think) that the k24 7400 shaft is too small to handle the loads at high boost for long periods. I'm running my 7400 to the limit of what it will flow, and my car is starting to feel slow again... (boost really IS like crack)

I haven't found a k26 style housing for the s200, hoping to avoid having to change manifolds.
Neacail
 
Posts: 10
Joined: Jul 23, 2016

Re: BorgWarner s200sx-e in machined k26 housing possible?

Postby rallyfreak202 » Thu Jan 25, 2018 1:44 pm

If you're willing to go V-band inlet and stock external WG, my friend is making a K-series flange to V-band adapter. This will work for the BW S200 sx-e. He can supply the turbine housing with v-band inlet and super core. Talk to Mike at SPS Tampa. I'm also sure that Marc could help you out with this.
rallyfreak202
 
Posts: 45
Joined: Mar 6, 2013

Re: BorgWarner s200sx-e in machined k26 housing possible?

Postby booested4door » Wed Mar 21, 2018 10:00 pm

more info on that k-vband adaptor please!!! this has potantial!
booested4door
 
Posts: 39
Joined: Feb 18, 2015

Re: BorgWarner s200sx-e in machined k26 housing possible?

Postby rallyfreak202 » Tue May 08, 2018 9:44 am

booested4door wrote:more info on that k-vband adaptor please!!! this has potantial!


This can be purchased from SPS Tampa.
Reply from SPS Tampa:
The final part number for that kit is 59007110023, and we have 24pcs available. They will sell at $162.67.
rallyfreak202
 
Posts: 45
Joined: Mar 6, 2013

Re: BorgWarner s200sx-e in machined k26 housing possible?

Postby booested4door » Tue May 22, 2018 1:51 am

killer! happen to have a web address? having problems finding them...
booested4door
 
Posts: 39
Joined: Feb 18, 2015

Re: BorgWarner s200sx-e in machined k26 housing possible?

Postby rallyfreak202 » Tue Jul 10, 2018 12:19 pm

booested4door wrote:killer! happen to have a web address? having problems finding them...


Southeast Power Systems of Tampa. (813) 623-1551
rallyfreak202
 
Posts: 45
Joined: Mar 6, 2013


Return to General

Who is online

Users browsing this forum: No registered users and 2 guests