Eurovan AAF Deck Height

General automotive discussion

Eurovan AAF Deck Height

Postby AngryTaco » Sun Feb 18, 2018 7:17 pm

Does anyone know off hand the specs to the AAF deck height? I'm ordering pistons this week. 2.5L Eurovan motor
1986 4000cs Turbo Quattro
2001 Dodge Dakota R/T Standard Cab
1990 V8 quattro
1995 urS6

-Hersh Performance and Racing Products-
http://www.hershperformance.com

Powerflex Dealer

Mechanic by day, Machinist by night, Student by Sleep
#thuglife
User avatar
AngryTaco
 
Posts: 2652
Joined: Mar 3, 2013
Location: Hayden Lake, Idaho

Re: Eurovan AAF Deck Height

Postby mrdeye » Tue Feb 20, 2018 12:21 am

Maybe you can find some info on this link

http://www.eurospecsport.com/index.htm

Over on MG user DDG could probably give some info too. I’m not sure but he might be over with different user name??? I’m sure someone here knows but it’s not me.

:beer:
Matt
Daily driver: '01 Toyota 4Runner
Project car: '84 Audi Coupe GT
Previous cars:
'95 S6 Avant, '87 5K TQ, '95 VW Golf, '84 VW Jetta turbo diesel, '84 VW GTI
mrdeye
 
Posts: 63
Joined: Nov 13, 2016
Location: Colorado

Re: Eurovan AAF Deck Height

Postby ChrisAudi80 » Tue Feb 20, 2018 2:34 am

IIRC 236mm
96 S6 auto
95 80Q AEB VEMS
ChrisAudi80
 
Posts: 738
Joined: Mar 2, 2013
Location: Bangkok, Thailand

Re: Eurovan AAF Deck Height

Postby PRY4SNO » Tue Feb 20, 2018 1:40 pm

236 mm for AAT & AEL, unsure of AAF.
Find me on Instagram @pry4sno

|| 2010 Golf Sportwagen TDI /// Farmenwagen
|| 1992 80 quattro 20v /// Eventual AAN'd Winter Sled
|| 1990 Coupe quattro /// Because Racecar

|| Spare parts for sale
User avatar
PRY4SNO
 
Posts: 2062
Joined: Mar 3, 2013
Location: Edmonton, AB

Re: Eurovan AAF Deck Height

Postby my2000apb » Tue Feb 20, 2018 11:33 pm

if you are ordering custom pistons, measure youre damn block!!!!! it would suck to get customs and realize yours was skimmed

and CORRECTION per mr Hank its 236.25mm
my2000apb
 
Posts: 1941
Joined: Mar 1, 2013
Location: new england

Re: Eurovan AAF Deck Height

Postby PRY4SNO » Wed Feb 21, 2018 10:33 pm

^^^ agree on measuring first to be sure.

When I sent my TDI block to Hank, he was very diligent and measured everything just to be sure. Good thing, because he noticed the cc on the combustion chamber wasn't quite right with the supplied pistons and rods. Long story short, he deduced (via plenty of mathing, I'm sure) that the 160mm rods were no good and swapped them for 159mm rods to get everything back to butter. Proof of being a solid guy, he didn't even charge a restocking fee... and I didn't buy the DMF rods from him, Marcel did.
Find me on Instagram @pry4sno

|| 2010 Golf Sportwagen TDI /// Farmenwagen
|| 1992 80 quattro 20v /// Eventual AAN'd Winter Sled
|| 1990 Coupe quattro /// Because Racecar

|| Spare parts for sale
User avatar
PRY4SNO
 
Posts: 2062
Joined: Mar 3, 2013
Location: Edmonton, AB

Re: Eurovan AAF Deck Height

Postby ChrisAudi80 » Fri Feb 23, 2018 7:59 am

PRY4SNO wrote:^^^ agree on measuring first to be sure.

When I sent my TDI block to Hank, he was very diligent and measured everything just to be sure. Good thing, because he noticed the cc on the combustion chamber wasn't quite right with the supplied pistons and rods. Long story short, he deduced (via plenty of mathing, I'm sure) that the 160mm rods were no good and swapped them for 159mm rods to get everything back to butter. Proof of being a solid guy, he didn't even charge a restocking fee... and I didn't buy the DMF rods from him, Marcel did.


No disrespect to Hank of course, but I seem to remember that stock rod length for the 95.5mm stroke tall deck blocks is 159mm.
96 S6 auto
95 80Q AEB VEMS
ChrisAudi80
 
Posts: 738
Joined: Mar 2, 2013
Location: Bangkok, Thailand

Re: Eurovan AAF Deck Height

Postby AngryTaco » Sat Feb 24, 2018 12:19 am

We got it figured out. I bought a 12" caliper and measured. Jeff and I are working on pistons right now

Several measurements resulted in 9.333 - 9.335"
1986 4000cs Turbo Quattro
2001 Dodge Dakota R/T Standard Cab
1990 V8 quattro
1995 urS6

-Hersh Performance and Racing Products-
http://www.hershperformance.com

Powerflex Dealer

Mechanic by day, Machinist by night, Student by Sleep
#thuglife
User avatar
AngryTaco
 
Posts: 2652
Joined: Mar 3, 2013
Location: Hayden Lake, Idaho

Re: Eurovan AAF Deck Height

Postby PRY4SNO » Sat Feb 24, 2018 12:50 pm

ChrisAudi80 wrote:
PRY4SNO wrote:^^^ agree on measuring first to be sure.

When I sent my TDI block to Hank, he was very diligent and measured everything just to be sure. Good thing, because he noticed the cc on the combustion chamber wasn't quite right with the supplied pistons and rods. Long story short, he deduced (via plenty of mathing, I'm sure) that the 160mm rods were no good and swapped them for 159mm rods to get everything back to butter. Proof of being a solid guy, he didn't even charge a restocking fee... and I didn't buy the DMF rods from him, Marcel did.


No disrespect to Hank of course, but I seem to remember that stock rod length for the 95.5mm stroke tall deck blocks is 159mm.


92.8 mm crank ;)
Find me on Instagram @pry4sno

|| 2010 Golf Sportwagen TDI /// Farmenwagen
|| 1992 80 quattro 20v /// Eventual AAN'd Winter Sled
|| 1990 Coupe quattro /// Because Racecar

|| Spare parts for sale
User avatar
PRY4SNO
 
Posts: 2062
Joined: Mar 3, 2013
Location: Edmonton, AB

Re: Eurovan AAF Deck Height

Postby chaloux » Sun Feb 25, 2018 10:56 am

PRY4SNO wrote:^^^ agree on measuring first to be sure.

When I sent my TDI block to Hank, he was very diligent and measured everything just to be sure. Good thing, because he noticed the cc on the combustion chamber wasn't quite right with the supplied pistons and rods. Long story short, he deduced (via plenty of mathing, I'm sure) that the 160mm rods were no good and swapped them for 159mm rods to get everything back to butter. Proof of being a solid guy, he didn't even charge a restocking fee... and I didn't buy the DMF rods from him, Marcel did.


Craziness. Sorry for the trouble on that, Dustin.
Matt

01 Allroad 6speed - RS4 clutch, catless downpipes, stuklr tune
04 Jetta TDI - DC stage I clutch/14lb fw
DEATH by rust - 96 Audi A6 Avant 2.5l TDI
GONE :( 87 4ktq - 4 FOX SNAKES
DEAD :( - 1996 S6 mit TDI
Image
User avatar
chaloux
 
Posts: 3162
Joined: Feb 27, 2013
Location: Muskoka, Ontario, Canada

Re: Eurovan AAF Deck Height

Postby PRY4SNO » Mon Feb 26, 2018 10:03 am

Not at all! There's a learning curve to be expected when building a unicorn.
Find me on Instagram @pry4sno

|| 2010 Golf Sportwagen TDI /// Farmenwagen
|| 1992 80 quattro 20v /// Eventual AAN'd Winter Sled
|| 1990 Coupe quattro /// Because Racecar

|| Spare parts for sale
User avatar
PRY4SNO
 
Posts: 2062
Joined: Mar 3, 2013
Location: Edmonton, AB


Return to General

Who is online

Users browsing this forum: No registered users and 5 guests