200 20v wheel/tire fitment

General automotive discussion

200 20v wheel/tire fitment

Postby Justin517 » Sun Apr 21, 2019 9:19 am

Hello all, been a while.

I picked up some 18x8.5 et30 wheels, I test fit a 245/40-18 and they fit nice especially because I’m not lowered (maybe someday but not a priority) but 255/35-18s are cheaper and look beefier.

I’m pretty sure I won’t have issues and worst case I’ll run more than the 0.3 degrees of camber I currently have in the rear but I wanted to see what some of the more aggressive widths/offsets that have been run on a flared t44. I’ve read every 20v build thread and no one likes posting wheel/tire specs, especially offsets.

Here’s the test fit: (front is still kinda high from lifting) I’m thinking the 255s will do me good especially at the off-road height.
76D71455-EFA1-44AA-B0E0-B43EA2C4ED9A.jpeg (1.4 MiB) Viewed 3490 times
62EC9612-814D-40C9-875B-F5424E383F12.jpeg (1.46 MiB) Viewed 3490 times
53B98675-71D7-44BD-9D47-722907178BC5.jpeg (1.42 MiB) Viewed 3490 times
AA078428-69C8-487C-AD90-59AD654AC6DF.jpeg (1.64 MiB) Viewed 3490 times

2003 540i/6 #1090/1265 imported M5 diff+Sway, Powerflex bushings, BC Racing coils
1991 200 20v Avant MRC Tune + Bilsteins... more to come.
2001 330Ci Convertible -Fiance Mobile
Posts: 282
Joined: Mar 5, 2013

Re: 200 20v wheel/tire fitment

Postby 20VAvant » Mon Jul 15, 2019 11:27 am

*If anyone was wondering, you can fit 18x9.5" ET 20mm wheels with 235 40 18 up front on maximum low*

excerpt from my old thread.

-2015 Lexus RX350 - Been promoted to dad duty.

-2014 Lexus IS350 - SOLD
-2015 Yamaha FZ-07 - SOLD
-2005 Honda CRF230F - SOLD
-2002 Dodge Ram 3500 5.9 Cummins 6 Speed - SOLD
-1991 200 20VTQ Avant - VEMS - SOLD
-2008 Dodge Ram 2500 - 6.7 Cummins - SOLD
User avatar
Posts: 369
Joined: Apr 9, 2013
Location: Florence, KY

Return to General

Who is online

Users browsing this forum: No registered users and 11 guests