The 20vt Quantum Syncro Wagon - The Group B Grocery Getter

Document and share your build!

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby the german » Thu Mar 01, 2018 12:35 pm

wow, I'm impressed you have that kind of room to play with. What does the steering rack setup in the quantum look like?
Kirk

1990 ABZ CQ
1990 lifted CQ
2005 S4 6MT
2011 A4 2.0T Avant (ok, it's my wife's car but it's sexy and I love it)
the german
 
Posts: 644
Joined: Feb 15, 2014
Location: Bellevue, WA

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby dougkehl » Thu Mar 01, 2018 1:16 pm

the german wrote:wow, I'm impressed you have that kind of room to play with. What does the steering rack setup in the quantum look like?


It's similar to a 4000. I'd bet identical. it's been a real long time since I've looked, but I'll have to see. I know there will be fitment issues somewhere along the line once I try to do this. I'm just going to have to work around it, but I know it's doable.
dougkehl
 
Posts: 86
Joined: May 2, 2017

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby dougkehl » Fri Mar 02, 2018 7:18 am

So I checked out the steering rack situation on the quantum last night to see how far I could shove the engine back without having to modify the steering rack's location and the answer is not as much as I want. It looks to me that there is maybe 1" - 1.5" max before I'll run into issues with the bell housing touching the rack. So I'll start figuring a solution that I can attempt to implement in the future.
dougkehl
 
Posts: 86
Joined: May 2, 2017

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby ringbearer » Fri Mar 02, 2018 12:44 pm

Cut the bellhousing? Don’t know how far you can stuff the rack into it before you hit the clutch though
User avatar
ringbearer
 
Posts: 1195
Joined: Feb 27, 2013
Location: Nor-Cal

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby the german » Fri Mar 02, 2018 2:48 pm

yeah that is what I was thinking would be the case. From a weight distribution perspective it's not generally worth the effort unless you can get things back 4-6", but if you need the space up front to fit a radiator that 1.5" may be pretty valuable.
Kirk

1990 ABZ CQ
1990 lifted CQ
2005 S4 6MT
2011 A4 2.0T Avant (ok, it's my wife's car but it's sexy and I love it)
the german
 
Posts: 644
Joined: Feb 15, 2014
Location: Bellevue, WA

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby PRY4SNO » Fri Mar 02, 2018 9:02 pm

Easy solution: 07k.

Bang, instant 3" clearance gained.

You're welcome ;)
Find me on Instagram @pry4sno

|| 2010 Golf Sportwagen TDI /// Farmenwagen
|| 1992 80 quattro 20v /// Eventual AAN'd Winter Sled
|| 1990 Coupe quattro /// Because Racecar

|| Spare parts for sale
User avatar
PRY4SNO
 
Posts: 2033
Joined: Mar 3, 2013
Location: Edmonton, AB

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby dougkehl » Mon Mar 05, 2018 7:51 am

ringbearer wrote:Cut the bellhousing? Don’t know how far you can stuff the rack into it before you hit the clutch though

That's a possibility, but I'm not sure where the clutch will be either. It may not be worth it. I looked at it again. I may try to retrofit a different rack in there. Possibly opt for something a little more responsive than the stock Audi rack.

the german wrote:yeah that is what I was thinking would be the case. From a weight distribution perspective it's not generally worth the effort unless you can get things back 4-6", but if you need the space up front to fit a radiator that 1.5" may be pretty valuable.

Yeah, I mean I'd love to stuff it back that far, but that's more work than my desired 3 inches back. But if I can get it the 3" back then it should provide me with the room to mount a sufficient intercooler and radiator.

PRY4SNO wrote:Easy solution: 07k.

Bang, instant 3" clearance gained.

You're welcome ;)

Damn you and your good ideas. Even though swapping in an 07k is a pretty extensive process in itself, but it is a way better engine.. Maybe you threw a wrench in everything I had planned
dougkehl
 
Posts: 86
Joined: May 2, 2017

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby the german » Mon Mar 05, 2018 12:00 pm

PRY4SNO wrote:Easy solution: 07k.

Bang, instant 3" clearance gained.

You're welcome ;)



Define "easy".... ;)
Kirk

1990 ABZ CQ
1990 lifted CQ
2005 S4 6MT
2011 A4 2.0T Avant (ok, it's my wife's car but it's sexy and I love it)
the german
 
Posts: 644
Joined: Feb 15, 2014
Location: Bellevue, WA

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby dougkehl » Tue Mar 06, 2018 7:57 am

Did a little bit of poking around in the engine compartment. I've determined that the rack itself is not the issue with stuffing the engine back 3 inches. It's the bracket that bolts to the rack that the tie rods bolt to. This picture of a URQ shows what I'm talking about. I've got about 1.5" give or take a little bit before the bell housing will hit that bracket. I think all I need to do is change that up, maybe make a set of tie rods to accommodate that change and then I should be in the clear.

ImageCapture by dougkehl1, on Flickr
dougkehl
 
Posts: 86
Joined: May 2, 2017

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby dougkehl » Wed Mar 21, 2018 5:17 pm

Started working on the throttle linkage. I figured that the linkage from a set of dual Weber DCOE carbs mounted on it's side would be a good place to start. I just need to make the bracket to hold this in place. I can't decide if I want to weld it in place or make the whole bracket removable from the intake. I'll probably make it removable though.
ImageIMG_9308 by dougkehl1, on Flickr
ImageIMG_9310 by dougkehl1, on Flickr
ImageIMG_9309 by dougkehl1, on Flickr

Also, in far more exciting news than the throttle linkage, I got in contact with Jeff for one of his billet cranks so this engine will be receiving a 77.4mm billet crank from Jeff and likely a set of his pistons. Now I just have to get on the horn with Pauter for a set of rods.
dougkehl
 
Posts: 86
Joined: May 2, 2017

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby PRY4SNO » Wed Mar 21, 2018 9:44 pm

Bolt-on/removable linkages make the most sense to me.

So you're de-stroking the engine? For higher revs, similar to what Chris/dramarider intends?
Find me on Instagram @pry4sno

|| 2010 Golf Sportwagen TDI /// Farmenwagen
|| 1992 80 quattro 20v /// Eventual AAN'd Winter Sled
|| 1990 Coupe quattro /// Because Racecar

|| Spare parts for sale
User avatar
PRY4SNO
 
Posts: 2033
Joined: Mar 3, 2013
Location: Edmonton, AB

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby dougkehl » Thu Mar 22, 2018 6:26 am

Yes, destroking for higher revs and because for some reason since I got the car I wanted to go the opposite way from most who opt to go to 2.5L and drop it down to 2.0L. But at first I think this thing will only be turning 8300 to 8500 or so rpm.. I know the stock oil pump can flow well enough up to that point. I'm not fully prepared to go with a dry sump oil set up yet, but I figure if I build everything accordingly it will then only be a matter of making the dry sump oil system fit into the car.
dougkehl
 
Posts: 86
Joined: May 2, 2017

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby dougkehl » Thu May 03, 2018 6:05 am

I've made no significant progress with anything related to the project lately. But I do have some updates. One I decided to forgo the crank from Jeff. The more I think about it the more it's not worth spending the $3300 it costs for one, especially when the factory crank is forged and perfectly strong and up to the task. And two, I picked up an 01E 6 speed last night for the car. I was going to try to keep the locker, but when life dumps a 6 speed in your lap for $200 you just take it and say okay the car is getting a 6 speed!
dougkehl
 
Posts: 86
Joined: May 2, 2017

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby audifreakjim » Mon May 07, 2018 11:14 am

Good move on both accounts :)
User avatar
audifreakjim
 
Posts: 2016
Joined: Mar 3, 2013

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby dougkehl » Mon May 07, 2018 4:18 pm

Yeah in the end it is a much better move. the factory crank is so strong and with the money im not spending on a billet crank i can buy rods pistons and get machine work done to the block as well as get the crank properly balanced.

I also made some progress over the weekend. I got the bracket for the throttle linkage made and made a vacuum manifold for the throttle bodies.

ImageImageImage

Sent from my SM-G920V using Tapatalk
dougkehl
 
Posts: 86
Joined: May 2, 2017

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby dougkehl » Mon May 07, 2018 5:13 pm

here's a quick video of the linkage.
https://youtu.be/o3rwS4YJK5k
dougkehl
 
Posts: 86
Joined: May 2, 2017

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby mrdeye » Mon May 07, 2018 6:46 pm

Looks good! Are you going to make some kind of bracket to support all of that ITB, intake manifold stuff?? It’s hang’n out there!
Matt
Daily driver: '01 Toyota 4Runner
Project car: '84 Audi Coupe GT
Previous cars:
'95 S6 Avant, '87 5K TQ, '95 VW Golf, '84 VW Jetta turbo diesel, '84 VW GTI
mrdeye
 
Posts: 59
Joined: Nov 13, 2016
Location: Colorado

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby dougkehl » Mon May 07, 2018 8:37 pm

mrdeye wrote:Looks good! Are you going to make some kind of bracket to support all of that ITB, intake manifold stuff?? It’s hang’n out there!
Thanks! and yes, absolutely! it is a ton of manifold to be hanging like that once the engine is running and vibrating. I may shorten it up a about 2 inches, but even so I'll still give it some sort of brace.

Sent from my SM-G920V using Tapatalk
dougkehl
 
Posts: 86
Joined: May 2, 2017

Re: The 20vt Quantum Syncro Wagon - The Group B Grocery Gett

Postby dougkehl » Tue May 15, 2018 10:18 am

Made a firewall anti-flex bracket over the weekend for the clutch master cylinder as the firewall was flexing so bad it's been noticeably harder to get into gear. I also threw in a new master cylinder last night to accompany the newer slave. Unfortunately I ran out of brake fluid so I couldn't rebleed the system. Hopefully it makes a difference.

I also ordered some 180 degree bends to make the split tube that goes to the top and bottom of the plenum.
Image
Image

And I started looking into throwing a set of Koni Yellows from a 200 quattro in the rear of the car. While the Mitsubishi Eclipse GSX shocks work fine, they are a little tall for the ride height and I have something like ~1.25" of travel before I'm on the already cut bump stop. My springs are only 300lbs in the rear so while the ride is harsher than stock by a lot, I attribute that more to the lack of shock travel and less to the spring rate. The Koni yellows from a 200 are a solid 2 inches shorter than the Eclipse shocks I have in there now so that's a good increase in shock travel. I may even do the same in the front, but have a set for a Mk1 rabbit revalved to suit the much heavier front end, because I feel even my Bilsteins up front are lacking in travel.
dougkehl
 
Posts: 86
Joined: May 2, 2017

Previous

Return to Projects

Who is online

Users browsing this forum: No registered users and 5 guests

cron