034 IIc question (MG is not the right place)

Discuss VEMS and other standalone ECUs

034 IIc question (MG is not the right place)

Postby pkw » Thu Jul 21, 2016 2:05 pm

So after the upgrade that came out years ago, what were the new downsides? Did I hear something about more picky timing wheel requirements and no cross hair or highlight for the cell that the car is operating in? Etc?

A new pick up problem would be unwelcome after an upgrade as would the inability to see what zone the car is operating in while driving and tuning, so I am very curious if this is the case. Is this real?

what downsides were seen after the upgrade?

I am still on old version with it's drawbacks including the "glitch".
500hp for $500? Holset + mc2 bottom + 7a head
viewtopic.php?f=11&t=1534
User avatar
pkw
 
Posts: 276
Joined: Mar 23, 2014

Re: 034 IIc question (MG is not the right place)

Postby type85 » Sun Jul 24, 2016 1:06 am

I have the same upgrade for my 1c's, lot's of functions, some are confusing w/o support.
Biggest complaint: crosshairs are covered up on active cell on main maps!
It would also be nice to be able to resize program to make the maps big enough to see while driving(!)
Image

Image
User avatar
type85
 
Posts: 136
Joined: Oct 25, 2014
Location: Los Angeles

Re: 034 IIc question (MG is not the right place)

Postby pkw » Sun Jul 24, 2016 7:38 am

Biggest complaint: crosshairs are covered up on active cell on main maps!

so what exactly does that look like? No hint as to what cell the car is operating in?
500hp for $500? Holset + mc2 bottom + 7a head
viewtopic.php?f=11&t=1534
User avatar
pkw
 
Posts: 276
Joined: Mar 23, 2014

Re: 034 IIc question (MG is not the right place)

Postby type85 » Sun Jul 24, 2016 9:07 am

pkw wrote:Biggest complaint: crosshairs are covered up on active cell on main maps!

so what exactly does that look like? No hint as to what cell the car is operating in?


Look for the cross hairs in the upper left corner...

Image
Image

Image
User avatar
type85
 
Posts: 136
Joined: Oct 25, 2014
Location: Los Angeles

Re: 034 IIc question (MG is not the right place)

Postby pkw » Sun Jul 24, 2016 11:08 am

So you can only see the outermost edges of the cross hairs, so you see the cell it is operating in, just harder to see than it used to be, before the update?
500hp for $500? Holset + mc2 bottom + 7a head
viewtopic.php?f=11&t=1534
User avatar
pkw
 
Posts: 276
Joined: Mar 23, 2014

Re: 034 IIc question (MG is not the right place)

Postby type85 » Sun Jul 24, 2016 11:19 am

pkw wrote:So you can only see the outermost edges of the cross hairs, so you see the cell it is operating in, just harder to see than it used to be, before the update?



pretty much yeah..... I've seen other programs where the cell changes color when highlighted... that would help!
Image

Image
User avatar
type85
 
Posts: 136
Joined: Oct 25, 2014
Location: Los Angeles

Re: 034 IIc question (MG is not the right place)

Postby audifreakjim » Mon Jul 25, 2016 7:02 pm

I can't remember what the downsides are, I think it was just the crosshairs. Nothing was as bad as that god damn ECU reset though.
User avatar
audifreakjim
 
Posts: 1944
Joined: Mar 3, 2013


Return to Standalone Engine Management

Who is online

Users browsing this forum: No registered users and 1 guest