Page 2 of 2

Re: Apogee Dynamics - New Website / Business

PostPosted: Tue Jan 03, 2017 11:09 pm
by ChrisAudi80
How about a 3d printed Audi 5 cylinder engine?

Re: Apogee Dynamics - New Website / Business

PostPosted: Thu Jan 05, 2017 12:08 am
by loxxrider
ChrisAudi80 wrote:How about a 3d printed Audi 5 cylinder engine?


You provide the models and the filament (I don't have that many colors) and I'd be happy to oblige!

Re: Apogee Dynamics - New Website / Business

PostPosted: Thu Jan 05, 2017 12:11 am
by loxxrider
PRY4SNO wrote:Oddball part request:

Cup holders. I know the c4 ones fit in the b3/b4, how about the t44? Could be worthwhile?


That is genius. Yes. I shall do it. Just don't let me forget! It will have to wait until I get my avant back to take measurements and test in, or at least until I can run to the farm and grab the printer. I haven't taken it to work with me since the avant broke because of all the chaos surrounding that situation.

But really, I think that's a fantastic idea. I'll name it after you when I put it on the product page if you want lol

Re: Apogee Dynamics - New Website / Business

PostPosted: Thu Jan 05, 2017 10:34 pm
by ChrisAudi80
loxxrider wrote:
PRY4SNO wrote:Oddball part request:

Cup holders. I know the c4 ones fit in the b3/b4, how about the t44? Could be worthwhile?


That is genius. Yes. I shall do it. Just don't let me forget! It will have to wait until I get my avant back to take measurements and test in, or at least until I can run to the farm and grab the printer. I haven't taken it to work with me since the avant broke because of all the chaos surrounding that situation.

But really, I think that's a fantastic idea. I'll name it after you when I put it on the product page if you want lol

Call them Sno-cones

Re: Apogee Dynamics - New Website / Business

PostPosted: Sun Jan 08, 2017 8:49 pm
by loxxrider
Haha prefect

Re: Apogee Dynamics - New Website / Business

PostPosted: Sun Jan 08, 2017 9:56 pm
by ChrisAudi80
loxxrider wrote:Haha prefect

:D

I could do with some cup/waterbottle holders in my S6 and 80. Where do they attach?

Re: Apogee Dynamics - New Website / Business

PostPosted: Fri Jan 13, 2017 5:06 pm
by loxxrider
They go in that area below the arm rest. Not sure how to describe it, but it's a rectangular area which you can slide two inserts into for cup holders. You could provably just use velcro to stick them in there.

Re: Apogee Dynamics - New Website / Business

PostPosted: Fri Jan 13, 2017 10:26 pm
by PRY4SNO
Couple different styles, I think both can work. I do know that the C4 holders are direct swap to the B3, that's what I'm rolling with right now. They use velcro from factory.

C4 style:
Image


B5 style:
Image

Re: Apogee Dynamics - New Website / Business

PostPosted: Sat Jan 14, 2017 1:03 am
by loxxrider
I'll say right off the bat that they wouldn't be normal interior part quality in terms of finish. Not right out of the printer anyway. But they'd be very functional. And with a little sanding and some interior parts paint (like the soft touch they use from the factory) it could look oem.

I'd be most interested in doing the vertical inserts at first.

Re: Apogee Dynamics - New Website / Business

PostPosted: Sat Jan 14, 2017 1:07 am
by PRY4SNO
That's what I was thinking too. The other ones are more detailed, you'd need a spring or some kind of mechanical tensioner which adds complexity.

Re: Apogee Dynamics - New Website / Business

PostPosted: Mon Jan 16, 2017 12:21 am
by ChrisAudi80
I see. It seems to me that the little tray in the B4 is shorter than in the C4.

Re: Apogee Dynamics - New Website / Business

PostPosted: Sun Feb 05, 2017 12:01 pm
by 88a5tq
Congrats on the business! The egt monitoring item case is looking great :)

Re: Apogee Dynamics - New Website / Business

PostPosted: Sun Feb 05, 2017 5:45 pm
by loxxrider
Thanks, I still need to find time to finish the circuit boards. Wish I had more experience with that

Re: Apogee Dynamics - New Website / Business

PostPosted: Fri Feb 24, 2017 12:52 am
by PRY4SNO
Universal versions of the trunk mounted grocery hooks in the B6.

Re: Apogee Dynamics - New Website / Business

PostPosted: Sat Feb 25, 2017 8:56 pm
by loxxrider
I suspect I could do something like that. What isn't universal about the one that is out there? Looks like it could screw into anything?

Re: Apogee Dynamics - New Website / Business

PostPosted: Wed Mar 01, 2017 8:52 pm
by PRY4SNO
I'd suspect they're just one of those kind of rare factory options, as the FS and partout threads always make mention of them if they're available. As for universal, my only guess is people may be reluctant to drill into the sheetmetal? If that's the case, perhaps some magnets or an adhesive would be an option. Just spitballing here.

Re: Apogee Dynamics - New Website / Business

PostPosted: Fri Jan 05, 2018 3:00 pm
by maxnadri
I went to your website and it was down? Come back!......

Re: Apogee Dynamics - New Website / Business

PostPosted: Mon Jan 08, 2018 1:17 am
by ChrisAudi80
maxnadri wrote:I went to your website and it was down? Come back!......

I think he is super busy. Haven't been able to contact him for a long time.
He got married last year and bought an AC Cobra so....