Aarons NEW Coilover DIY, B3/CQ stuff.

Do It Yourself!

Re: Aarons NEW Coilover DIY, B3/CQ stuff.

Postby scubagli » Sat Aug 13, 2016 7:40 am

A1QSHIP wrote:FWIW, Messaged Albert @ AKmotorsport about the steering arm position on KW suspension front struts for the B3/B4 chassis. He replied that the dimensions were the same as stock. Without having the front struts side by side..... :idunno:

That may be, but due to the design of the kw arms there is more clearance...but I have my reservations about that. At one point I made templates of kw steering arms from a friends set, I feel like they are shorter and rotated towards the car.

Sent from my SAMSUNG-SM-G870A using Tapatalk
User avatar
scubagli
 
Posts: 604
Joined: Feb 5, 2014
Location: leeds ny

Re: Aarons NEW Coilover DIY, B3/CQ stuff.

Postby scubagli » Sat Aug 13, 2016 7:41 am

Double post :mrgreen:
User avatar
scubagli
 
Posts: 604
Joined: Feb 5, 2014
Location: leeds ny

Re: Aarons NEW Coilover DIY, B3/CQ stuff.

Postby A1QSHIP » Sat Aug 13, 2016 2:54 pm

scubagli wrote:
A1QSHIP wrote:FWIW, Messaged Albert @ AKmotorsport about the steering arm position on KW suspension front struts for the B3/B4 chassis. He replied that the dimensions were the same as stock. Without having the front struts side by side..... :idunno:

That may be, but due to the design of the kw arms there is more clearance...but I have my reservations about that. At one point I made templates of kw steering arms from a friends set, I feel like they are shorter and rotated towards the car.

Sent from my SAMSUNG-SM-G870A using Tapatalk


:thumbsup: This is what we need to know. Real world measurements & side by side comparisons.
Nulla tenaci invia est via
User avatar
A1QSHIP
 
Posts: 93
Joined: Jul 4, 2013
Location: Lexington, KY

Re: Aarons NEW Coilover DIY, B3/CQ stuff.

Postby A1QSHIP » Wed Aug 24, 2016 11:14 am

Colin2750 wrote:I'm 400 front 450 rear, KW v1s, front swaybar on front and rear with a rear strut bar and a torsen rear diff. Handles like a champ. Will come out on me if hard on the brakes, could slide it nicely with more power and/or wet surface. :drive:

Basically what I'm saying is DO STIFFER IN THE REAR. I used to have 360 in the rear and it was understeer city.


Colin,
What are you running for a brake system on this setup?
Nulla tenaci invia est via
User avatar
A1QSHIP
 
Posts: 93
Joined: Jul 4, 2013
Location: Lexington, KY

Re: Aarons NEW Coilover DIY, B3/CQ stuff.

Postby Zaworek » Wed Aug 24, 2016 10:56 pm

20160821_190415.jpg
20160821_190415.jpg (1.41 MiB) Viewed 1030 times
20160821_190415.jpg
20160821_190415.jpg (1.41 MiB) Viewed 1030 times
hey going back to my previous post regarding the sleeves here are the images along with the measurements
Attachments
20160821_190451.jpg
20160821_190451.jpg (1.25 MiB) Viewed 1030 times
- Sebastian -

- free your mind, go have a boost -
91 Audi Coupe Quattro Red 3b swap - Vems - e85
User avatar
Zaworek
 
Posts: 103
Joined: Jan 13, 2015
Location: New York

Previous

Return to DIY Write-ups

Who is online

Users browsing this forum: No registered users and 1 guest

cron