1989 80q part out

Buy and Sell your parts here

1989 80q part out

Postby DE80q » Fri Mar 30, 2018 8:58 am

I figured I would start this now, to see who needs what. I have an early '89 80q with square stock switches, no air bag, and a trip computer. I don't know if the trip computer works though. Overall the car looks to be in good shape, but apparently it doesn't run right. It has around 218k on the clock, and I was told it shifted beautifully. I'm going to try to get it running enough to drive it a little, and make sure everything seems ok.

So here is what I know about the car.
-It's lowered. Was told it has H&R springs, was also told it has been upgraded to the later 2 piece suspension. Will confirm asap.
-it has my old stebro rear muffler on it.
-it has the 034 S2 shifter mod.
-it has clear corners on DOT headlights.
-it has a driver cubby(looks like some of the screw holes are broken)
-it has a pass through tank for a ski sack(I've never seen an 80 with this option)
-it has almost new(was told around 1500 miles) 14" tires.
-it still has the headlight squirters, and they look to be in good shape.
And it still has the AUX radiator, which looks to be in pretty good shape.

The car has had a grey leather seats from a 90q swapped in, and is pretty good shape other than the driver's seat. It's a black car, so most of the body panels will probably be put in storage for my car if anything ever happens.

Now, here is the rub. I'm in the middle of moving, so this will be quite slow. I am going to Carlisle, so I can bring parts there. If there are any parts you need, please shoot me a PM, and I'll get back to you ASAP. I'm doing this to fund my TIG welder purchase, so don't hesitate to make offers.

Attached is the one crappy pic that I have taken of the car.
Attachments
IMG_20180311_121004561.jpg
IMG_20180311_121004561.jpg (2.09 MiB) Viewed 1476 times
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (10vt project)
2007 Mitsubishi Raider(Dakota in disguise)
2014 Chevy traverse (It's what she wanted)
DE80q
 
Posts: 2135
Joined: Mar 4, 2013
Location: York PA 17403

Re: 1989 80q part out

Postby DE80q » Sun Apr 01, 2018 11:13 am

I have been asked twice now, so I'll put it here.

I will not sell the car as a whole. This is because the car car many problems that would make it not worth repairing. The engine is bad, the fuel system is hacked, multiple electrical issues, the windshield leaks, and the interior carpet is soaked and smells. I would assume the floors are getting rusty due to the standing water in the front of the cabin. Yes, the body looks to be in good shape, but we are pretty sure it is a respray, and the DS back door is rusting, and other areas are showing signs of rust as well.
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (10vt project)
2007 Mitsubishi Raider(Dakota in disguise)
2014 Chevy traverse (It's what she wanted)
DE80q
 
Posts: 2135
Joined: Mar 4, 2013
Location: York PA 17403

Re: 1989 80q part out

Postby DE80q » Sun Apr 08, 2018 7:48 pm

Got the front end pulled off today, and the aux radiator looks pretty good. Has some corrosion, but nothing hateful. I'll post pics later, was in kind of a rush today.
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (10vt project)
2007 Mitsubishi Raider(Dakota in disguise)
2014 Chevy traverse (It's what she wanted)
DE80q
 
Posts: 2135
Joined: Mar 4, 2013
Location: York PA 17403

Re: 1989 80q part out

Postby DE80q » Mon Apr 16, 2018 7:40 am

Bumping this because I am now "officially" moved into the new place and can check on thing easily now
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (10vt project)
2007 Mitsubishi Raider(Dakota in disguise)
2014 Chevy traverse (It's what she wanted)
DE80q
 
Posts: 2135
Joined: Mar 4, 2013
Location: York PA 17403

Re: 1989 80q part out

Postby DE80q » Sat Apr 28, 2018 6:56 pm

Carlsile is less than a month away. If you need anything, let me know.
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (10vt project)
2007 Mitsubishi Raider(Dakota in disguise)
2014 Chevy traverse (It's what she wanted)
DE80q
 
Posts: 2135
Joined: Mar 4, 2013
Location: York PA 17403

Re: 1989 80q part out

Postby DE80q » Wed May 02, 2018 9:56 am

And for those who have asked, no I'm not parting the bandit. And for those who said there was no way my wife would let me buy another 80q the same month I bought a house, here is a pic of the near twins together! :P

Image
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (10vt project)
2007 Mitsubishi Raider(Dakota in disguise)
2014 Chevy traverse (It's what she wanted)
DE80q
 
Posts: 2135
Joined: Mar 4, 2013
Location: York PA 17403

Re: 1989 80q part out

Postby Nateflix56 » Tue May 08, 2018 8:58 am

I would be interested in a box of bolts. I need all the bolts for the core support, bumper, bumper support, lower front cross member, and headlights.
90 CQ - 07k Swap Pending
15 2500HD Sierra Denali Duramax
01.5 B5 S4 (Sold)
98 Jetta VRT (Sold)
Nateflix56
 
Posts: 35
Joined: Dec 27, 2017
Location: Puyallup, Wa


Return to Swap Meet

Who is online

Users browsing this forum: No registered users and 1 guest