FS Holset HX35/40, Manifold, Cummins oil Lines

Buy and Sell your parts here

FS Holset HX35/40, Manifold, Cummins oil Lines

Postby morris400 » Wed Apr 18, 2018 3:54 pm

Hey guys,

I have a Holset HX35 turbo with a HX40 compressor wheel and housing. also has the 12cm Non WG exhaust housing with T3 flange. I picked this up from Goldfarb, it was rebuilt before I got it and is in great shape. I has the housings sand blasted and the comp housing powder coated. $400 Shipped

the injectors are 630cc from Chris. still new in the box and never used. comes with the adapters for the stock connectors. (SOLD)

the manifold is a Ebay tube manifold, I have a T3 flange that would need to be welded on to mount the turbo. this is also new and never used. comes with the gaskets and the studs as well. $ 150 with or without the T3 Flange.

the ecu is a stock urs4 ecu that I was going to send away to be tuned. (SOLD)

I also have a set of 2 Cummins drain lines for the turbo, these are OEM from Cummins. the flanges fit both the turbo and the block. they will require a bit of fab work, but the flange and the ID of the line is what is required by Cummins. $65 Shipped

and I have a Cummins Vband flange and clamp to make a downpipe. the vband on Holset turbos is not a standard Vband so again OEM Cummins was the best way to go. $100 Shipped

also have a 4an braided SS line and AN connectors to make the Feed line, with 034 adapter on oil filter housing. $80 Shipped

Im open to offers.

PICS here http://www.motorgeek.com/viewtopic.php? ... ead#unread
1994 UrS4 Intended Acceleration Chip
2001 B5 S4 Stg 3- ( gone but not forgotten )
IF YOU CANT STAND BEHIND OUR TROOPS...FEEL FREE TO STAND IN FRONT OF THEM!
User avatar
morris400
 
Posts: 167
Joined: May 10, 2013
Location: Alberta, Canada

Re: FS Holset HX35/40, Manifold, Cummins oil Lines

Postby morris400 » Tue May 08, 2018 9:32 am

Bump, looking to sell this stuff quick. open to offers. ECU and Injectors sold!
1994 UrS4 Intended Acceleration Chip
2001 B5 S4 Stg 3- ( gone but not forgotten )
IF YOU CANT STAND BEHIND OUR TROOPS...FEEL FREE TO STAND IN FRONT OF THEM!
User avatar
morris400
 
Posts: 167
Joined: May 10, 2013
Location: Alberta, Canada

Re: FS Holset HX35/40, Manifold, Cummins oil Lines

Postby morris400 » Tue May 22, 2018 5:21 pm

Turbo sold. And all the lines sold. Only the manifold left looking to get rid of cheap...make me an offer willing to trade as well for a cast rs2 REP ebay manifold.
1994 UrS4 Intended Acceleration Chip
2001 B5 S4 Stg 3- ( gone but not forgotten )
IF YOU CANT STAND BEHIND OUR TROOPS...FEEL FREE TO STAND IN FRONT OF THEM!
User avatar
morris400
 
Posts: 167
Joined: May 10, 2013
Location: Alberta, Canada


Return to Swap Meet

Who is online

Users browsing this forum: No registered users and 3 guests

cron