Aan throttle body and vems.

General automotive discussion

Aan throttle body and vems.

Postby vinniepearl » Thu Jan 10, 2019 2:32 pm

I'm running vems in my aan swapped coupe. I'm trying to find the proper connector for the throttle position sensor as I dont have the aan harness. Does anyone know where I can source the connector?

Also, I need to wire up the tps to work with vems. Which pins do I need to utilize? Would I better off using an entirely different throttlebody?

Sent from my SM-G892A using Tapatalk
vinniepearl
 
Posts: 12
Joined: Jun 10, 2016

Re: Aan throttle body and vems.

Postby Marc » Thu Jan 10, 2019 7:42 pm

Marc Swanson
Proprietor, EFI Express

Image
Marc
 
Posts: 1568
Joined: Feb 27, 2013

Re: Aan throttle body and vems.

Postby Afterthought » Thu Jan 10, 2019 7:50 pm

What intake manifold do you have in the car currently? If its an AAN manifold I'd use the AAN throttle body/TPS since you wouldn't need an adapter to run it.
the plug, I was looking for it at one point, the PN is 025 906 238 B is the number for the female/ harness side of plug .
The AAN TB does work well with vems and calibration is easy. I don't have the pinout handy but I think its on the S2Forum
****
Afterthought

1983 UrQuattro - http://theprojectpad.com/viewtopic.php?f=11&t=1819&p=72513#p72513
1983 Ur Quattro restoration project
1990 Coupe
2007 RS4 Piece of crap headache
Afterthought
 
Posts: 922
Joined: Jan 16, 2014
Location: Bellingham, Wa

Re: Aan throttle body and vems.

Postby vinniepearl » Thu Jan 10, 2019 9:45 pm

Thanks marc! Didnt realize it was on your website. I'll search for the pinout on the s2 forum.

Sent from my SM-G892A using Tapatalk
vinniepearl
 
Posts: 12
Joined: Jun 10, 2016

Re: Aan throttle body and vems.

Postby vinniepearl » Thu Jan 10, 2019 10:04 pm

Assuming I dont need to use the throttle closed part, just pin 1 2 and 3. Looks like pin 3 would be the wiper which would run into vems? Image

Sent from my SM-G892A using Tapatalk
vinniepearl
 
Posts: 12
Joined: Jun 10, 2016

Re: Aan throttle body and vems.

Postby vinniepearl » Thu Jan 10, 2019 10:09 pm

vinniepearl wrote:Assuming I dont need to use the throttle closed part, just pin 1 2 and 3. Looks like pin 3 would be the wiper which would run into vems? Image

Sent from my SM-G892A using Tapatalk
Pin 3 - ec36 - 1
Pin 1 - ec36 - 29
Pin 2 - sensor ground

Sent from my SM-G892A using Tapatalk
vinniepearl
 
Posts: 12
Joined: Jun 10, 2016


Return to General

Who is online

Users browsing this forum: Google [Bot] and 2 guests

cron