Fuel injector selection 10VT

General automotive discussion

Fuel injector selection 10VT

Postby DE80q » Mon Feb 11, 2019 12:51 pm

I'm looking to upgrade my injectors when I do the turbo upgrade.

The current setup is MC1 with MC2 cam, MS3X fully sequential, 440cc extended tip injectors, 044 fuel pump, 3" turbo back exhaust, 1 piece exhaust manifold and K24 turbo.

The new setup will have a tubular stock placement manifold and ITS 58mm turbo with #8 replica housing.

I'm currently pushing the limits of the 440cc injectors now with the K24 spiking to 22psi and holding 20psi to redline. With the new turbo being significantly larger, I'm figuring I should upgrade the injectors at the same time. I have seen that the Evo X injectors are 650cc injectors, and can be had pretty cheap. I don't have easy access to e85, so I don't think I'll be doing flex fuel in the near future. A anybody have any other suggestions on this?
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (10vt project)
2007 Mitsubishi Raider(Dakota in disguise)
2014 Chevy traverse (It's what she wanted)
DE80q
 
Posts: 2250
Joined: Mar 4, 2013
Location: York PA 17403

Re: Fuel injector selection 10VT

Postby PRY4SNO » Mon Feb 11, 2019 9:21 pm

How's the spray pattern on those Evo injectors? I'm unsure of their head/port design so that's the first thing that comes to mind.

Actually, how important is spray pattern to accurate fueling? I mean... I'd think fairly important?

That was basically the idea behind why I sourced Genesis GII injectors for my build... they were designed around our cylinder head architecture and atomize really well. I did a bunch of other research at the time, but this page does a fine job of presenting the case.

https://usrallyteam.com/index.php?main_ ... Path=10_44
Find me on Instagram @pry4sno

|| 2010 Golf Sportwagen TDI /// Farmenwagen
|| 1992 80 quattro 20v /// Eventual AAN'd Winter Sled
|| 1990 Coupe quattro /// Because Racecar

|| Spare parts for sale
User avatar
PRY4SNO
 
Posts: 2160
Joined: Mar 3, 2013
Location: Edmonton, AB

Re: Fuel injector selection 10VT

Postby DE80q » Tue Feb 12, 2019 11:59 am

I'm really not sure about the spray pattern. The Volvo injectors are a 2 hole extended tip EV1 based injector, where as I believe the Evo X injectors are extended tip EV14 based with I think 4 holes. It can be hard to find pics of the actual injector tip. I figure with the 10vt originally being CIS, as long at the atomization is as good or better than the CIS injector, it should be ok with having the extended tip.
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (10vt project)
2007 Mitsubishi Raider(Dakota in disguise)
2014 Chevy traverse (It's what she wanted)
DE80q
 
Posts: 2250
Joined: Mar 4, 2013
Location: York PA 17403

Re: Fuel injector selection 10VT

Postby DE80q » Wed Feb 13, 2019 1:55 am

I was a little off on the home count... Look like the attached pic.
Attachments
fj970-3.jpg
fj970-3.jpg (45.32 KiB) Viewed 143 times
"If you can't find one, make one"

Dallastown, PA
1991 Audi 80 quattro (10vt project)
2007 Mitsubishi Raider(Dakota in disguise)
2014 Chevy traverse (It's what she wanted)
DE80q
 
Posts: 2250
Joined: Mar 4, 2013
Location: York PA 17403


Return to General

Who is online

Users browsing this forum: No registered users and 4 guests

cron