Page 1 of 1

Your dream built, bored out, high boost, stroker engine.

Posted: Tue Jun 18, 2013 10:19 am
by chaloux
Unassembled. Add $900 for assembly and machining of block.

-236mm tall deck block
-NLA 92.8mm crank
-New Iroz 160mm rods
-New coated rod and main bearings
-New Wiseco 82.5mm coated top & skirt 8.1:1 pistons
-New Iroz I5 tubular exhaust manifold
-New 12mm ARP head studs
-ARP main studs
-10k km (yes, since NEW) ported head with new +.5mm exhaust valves, high rate springs, new seals etc
-7a cams
-could include new Iroz downpipe. Built for quick spool valve geo in a UrS chassis, vband/Stromung fitment
-could include ported and gutted AAN intake manifold

This setup will rev to 8500rpm or whatever you feel safe taking the stock oil pump to. Ideally this would be a high boost (over 30psi) pump gas engine. Ie. Big turbo in its higher efficiency range.

$5k plus assembly mentioned above if desired

Re: Your dream built, bored out, high boost, stroker engine.

Posted: Tue Jun 18, 2013 2:37 pm
by 20VAvant
Do small children count as currency....?
If so, I'll take it. :P

Wish I had money and a second car for that.

Re: Your dream built, bored out, high boost, stroker engine.

Posted: Wed Jun 19, 2013 9:05 am
by PRY4SNO
oh em gee


i do not fn want to see this right now

Re: Your dream built, bored out, high boost, stroker engine.

Posted: Tue Jun 25, 2013 4:21 am
by PRY4SNO
PMd

Re: Your dream built, bored out, high boost, stroker engine.

Posted: Thu Jun 27, 2013 3:15 pm
by amd is the best
I should buy all.

Re: Your dream built, bored out, high boost, stroker engine.

Posted: Thu Jun 27, 2013 3:37 pm
by chaloux
Dis + 3586/6466 +qsv +35psi.... Just saying

on my stinking phone!

Re: Your dream built, bored out, high boost, stroker engine.

Posted: Thu Jun 27, 2013 3:57 pm
by amd is the best
chaloux wrote:Dis + 3586/6466 +qsv +35psi.... Just saying

on my stinking phone!


3794 ;)

Re: Your dream built, bored out, high boost, stroker engine.

Posted: Thu Jun 27, 2013 7:39 pm
by EDIGREG
3794 would have a pretty tiny power band with an 8500rpm redline

Re: Your dream built, bored out, high boost, stroker engine.

Posted: Thu Jun 27, 2013 7:41 pm
by chaloux
2.5l + qsv... Shouldn't be too bad

on my stinking phone!

Re: Your dream built, bored out, high boost, stroker engine.

Posted: Thu Jun 27, 2013 7:43 pm
by chaloux
5500-6krpm and over 800hp. :dunno:

on my stinking phone!

Re: Your dream built, bored out, high boost, stroker engine.

Posted: Fri Jun 28, 2013 4:12 am
by PRY4SNO
amd is the best wrote:I should buy all.


You'll have to scoop up what crumbs are left after I'm done.

I've phoned in my order to Matt directly and am awaiting a final price.

:D

Re: Your dream built, bored out, high boost, stroker engine.

Posted: Fri Jun 28, 2013 4:35 am
by amd is the best
I can't buy anything right now anyway :(

Re: Your dream built, bored out, high boost, stroker engine.

Posted: Fri Jun 28, 2013 7:52 am
by Hank
8-) 8-)

Re: Your dream built, bored out, high boost, stroker engine.

Posted: Fri Jun 28, 2013 10:16 am
by chaloux
So it looks like, pending sale to Dustin, that we'll have a new Hank header with egt on cyl 5 and vband with tial setup for sale. $1100 shipped today :-)

Also a new Hank downpipe for qsv on a UrS car, $400 shipped.

Lastly, new supertech +.5mm inconel exhaust valves and high rate valve springs. $250 valves, $200 springs

on my stinking phone!

Re: Your dream built, bored out, high boost, stroker engine.

Posted: Mon Jul 29, 2013 12:25 pm
by chaloux
Bump, the engine is Dustin's. The above is for sale as mentioned. New thread maybe?