- 3880B17E-C611-4865-8002-9658234DAFDF.jpeg (65.38 KiB) Viewed 2865 times
Urs front hub with an E36 wheel bearing. Had to take about 3mm off the knuckle in a cone shaped angle. it’s definitely a really tight fit
Andy's 91' 80q
Re: Andy's 91' 80q
by rennenmsports » Sat Mar 04, 2023 10:51 pm
Urs front hub with an E36 wheel bearing. Had to take about 3mm off the knuckle in a cone shaped angle. it’s definitely a really tight fit
- rennenmsports
-
- Posts: 133
- Joined: Jan 15, 2017
Re: Andy's 91' 80q
by rennenmsports » Sun Mar 05, 2023 12:08 pm
- A6612661-0261-4428-B434-5D0ED4EB53C0.jpeg (106.21 KiB) Viewed 2846 times
Bruce lee’s 1 inch punch to spread the transmission tunnel for the 01E 6 spd
- rennenmsports
-
- Posts: 133
- Joined: Jan 15, 2017
Re: Andy's 91' 80q
by rennenmsports » Sun Mar 05, 2023 12:24 pm
- B0D75535-5CB9-4EBA-9DF5-628798B9B987.jpeg (131.06 KiB) Viewed 2843 times
It’s getting really close. Just need a front brake set up. If anyone has one for sale please pm me
- rennenmsports
-
- Posts: 133
- Joined: Jan 15, 2017
Re: Andy's 91' 80q
by rennenmsports » Thu Mar 09, 2023 7:00 am
- CF9C3DED-512F-4777-A2C2-B562E0C85109.jpeg (69.07 KiB) Viewed 2697 times
I used a counter sink bit to be able to use a flat headed taper bolt so I can install a -10an banjo fitting for the transmission cooler
- rennenmsports
-
- Posts: 133
- Joined: Jan 15, 2017
Who is online
Users browsing this forum: No registered users and 12 guests