Hersh Performance and Racing Products - Epic Motor Mounts

[AngryTaco]

If you were to send me just the bushing (s) thats all I would need. I think I have the dimensions already but those might be for something else. I thought they were from the 200 20v but that is still a t44 setup if I remember correctly

[AngryTaco]

Test fitted the mounts tonight and they are perfect! I can start production immediately. Sending out requests and invoices to those interested parties. There will be a will a 1/4" polyurethane spacer/cushion under the plate. Let the awesome mounts begin!

You'll also notice I decided to add a stiffener to the sides. This will keep everything from moving outside of tolerances while under a load

[85oceanic]

Woot! Those look great man!

[AngryTaco]

Small chassis subframe bushings ready to be produced! Hoping to get some preorders to help offset my first run. $125 per CAR. Thats $12 less than 034. Will fit URq / 4000 / 80 / 90 / CQ. Price is plus shipping.

They are 6061 aluminum. I can sell enough for one subframe as well. $65 per subframe or $125 per car

[AngryTaco]

Pre order special updated under small chassis subframe bushings. Need 5 paid orders to get the ball rolling

[90quattrocoupe]

10mm or 12mm?

Greg W.

[AngryTaco]

Since they are aluminum, I can have it done either way. Just specify wheb ordering

[AngryTaco]

Invoices have been sent out and awaiting payments. Plates will be made early this week and everyone should have theirs next week

[AngryTaco]

Mounts are in production! Super awesome epic pictures to follow completed retail mounts!

[AngryTaco]

How many people here would like replacement reflector lenses that go on the bumper as well as replacement turn signal lenses?

I think I have found my method of recreating them and I will be developing them over a weekend when I get the time. Maybe even this weekend

[Rocket SLC]

I 'm looking forward to trying these out. Keep up the good work Mr. Hersh!

[Colin2750]

Need any more testers for motor mounts? I need some baaaaad and these look tits!

[AngryTaco]

Colin, I'll send you a PM in a few once work slows down a bit

Edit: You have PM Colin

[AngryTaco]

ATTN:

Currently working on replacement bumper reflectors and fiberglass reinforced silicon michelan man hose.

Also slowly working on replacement polyurethane upper strut mounts for small chassis and other vehicles that use them.

Stay tuned.

[DE80q]

Um, this grew quickly! Glad to see others are interested. Keep me informed on the mounts.

[AngryTaco]

First Motor Mount Plates run is complete! I have 1 more pair for anyone wanting a set.

[AngryTaco]

First run all welded up. Being dropped off at powdercoater on Monday.

[AngryTaco]

Mounts are currently at powdercoat shop and I am awaiting my polyurethane to arrive. Everyone should see their mounts hopefully within 10-14 days .

On a side note, I am pleased to announce that I am now a provider of super high quality fiberglass reinforced silicon hoses for both intake and radiator hoses. These are of extremely high quality and well tested. I run them on my own personal ride and are of epic proportions!

[20VAvant]

Are those welds done with a MIG gun? If so, rather impressive. Excited to get mine!

[AngryTaco]

Are those welds done with a MIG gun? If so, rather impressive. Excited to get mine!

They sure are. Not all were perfect, but still better than I expected them to look

[AngryTaco]

I would really appreciate any feedback on the website. Also, be sure to like the business on facebook!

https://www.facebook.com/hershperformanceandracing

[AngryTaco]

If anyone needs intake hoses for their custom setups, please let me know before Friday so I can have them ready to ship next week.

These are 2-ply FIBERGLASS reinforced! They have an operating temp of -65F up to 600*F. These are extremely high quality and will hold over 100 psi of pressure. These are not your average ebay hoses and couplers!

[my2000apb]

hey jared, just a thought for you, hump hoses @ angle, ive never seen any before, but say a 15 and 30 degree version, more abrubt angled couplers seem to deflect better. so a hump hose with just a bit of angled offset would be TITS!!!

[AngryTaco]

Thats an excellent idea Tim. When I go to pick up my inventory this week from the manufacturer, I'll run that by them and see what they say. The straight one like in the picture is good for up to a 10-degree offset

[AngryTaco]

Picking up powdercoated mounts tomorrow!! Pictures soon! All thats left is for the polyurethabe to arrive!!