The Project Pad

loxxrider wrote:Dmitry, where did you get that main girdle? This piece

eBay, Pope bids won from Germany

2.5TYPE44 wrote:Дмитрий, у меня есть три вопроса.
1. Как вы делали вентиляции на пассажирских крыло
2. Насколько сложно было перейти на новый стиль, двойной кондиционер панель управления
3. Что вы делали, чтобы получить рулевое колесо с тремя спицами, чтобы соответствовать

Thank you for writing so, but let's use English he did under international .. I do not see any reason to adjust.

1)Wing ventilation, made to me. deflector is welded from MB, like from a "sprinter"
2) No, not hard. only it is necessary to connect the wiring. I would plug in a regular place, instead of native climates. schemes understood. evaporator take from A6 / S6 c4, stove also from them, and so kondeya tube remains native. or you can change everything on c4 body. control unit take from S4 91-94 or V8 4.2 92-94
3) speech about adjustable column? and the steering wheel from the S6?

90quattrocoupe wrote:

2.5TYPE44 wrote:Дмитрий, у меня есть три вопроса.
1. Как вы делали вентиляции на пассажирских крыло
2. Насколько сложно было перейти на новый стиль, двойной кондиционер панель управления
3. Что вы делали, чтобы получить рулевое колесо с тремя спицами, чтобы соответствовать

For those of us who do not read russian.

Dmitry , I have three questions.
1. How did you do on passenger ventilation wing?
2. How difficult was it to go to the new style , dual air conditioner control panel?
3. What did you do to get the steering wheel with three spokes to match?

Greg W.

Thanks ))

Girdles with or without bolts and "washers" can be bought from http://webshop.cp-service.se/en/67-audi. Lots of good stuff for 5cyl 20vt Also billet main bearing caps etc.

Small crash




and now





VEMS assembled today tried to start it . on my father's brain did not see the MAP sensor. my sees everything . but it must be calibrated by .. I have something to back happened , it hurts that horror. barely walk .

AudiQuattros wrote:

Do I spy a Kentucky Fried Chicken?!?

How is the part availability where you are located?

I love how the VEMS is in a factory ECU box!

stin wrote:Girdles with or without bolts and "washers" can be bought from http://webshop.cp-service.se/en/67-audi. Lots of good stuff for 5cyl 20vt Also billet main bearing caps etc.

Ah very good. Thank you!

20VAvant wrote:

AudiQuattros wrote:

Do I spy a Kentucky Fried Chicken?!?

How is the part availability where you are located?

hahaha )) I'm in St. Petersburg, Russia . As we say in the cultural capital . If someone when you go to us for any reason , write, meet ))
https://www.google.ru/maps/place/WC/@60 ... 1b0535024a

amd is the best wrote:I love how the VEMS is in a factory ECU box!

Of course not so beautiful as when you buy ready . but cheaper. in which case you can remove vems . and put regular brain and go !

unfolded intake manifold. the week will change valve cover , will AAN ventilated head. manifold and put a big front cooler .

You flipped the intake plenum around? Interesting idea.

loxxrider wrote:You flipped the intake plenum around? Interesting idea.

Yes , unfolded

I'm surprised it fits so well. Is the Power Steering pump still connected and working? Is your A/C Condensor removed?

we arrange club meetings . Turbo-Quattro.com
Come from all over the country's S-ochniki))



















[img]http://cs618825.vk.me/v618825613/16bf2[img][/img]/wj0RmlzqMk0.jpg[/img]












If anyone would ever wish to come to Russia , walk and so on. then let me know! meet ! You can even locate the house ... tours on request ))
in St. Petersburg stunning white nights ! best time to go to us






Just Machine friend BMW 3 e21 m20 Holset35 0.9bar

pilihp2 wrote:I'm surprised it fits so well. Is the Power Steering pump still connected and working? Is your A/C Condensor removed?

I have all the costs of the AAN. And everything works fine . )
I removed the air conditioner . because I do not like it . I can not stand it. alas ..

Would love to come visit! Amazing updates and thank you for the pictures!

themagellan wrote:Would love to come visit! Amazing updates and thank you for the pictures!

I have always been very helpful information that I get the following for the different machines at different sites! and then all gathered in one place! and it's very cool! glad that I was invited here will be able to come, I unfortunately do not have means to get out while abroad, but would love to go to America!

Re: Audi 200 20v Avant - Shed the 18 year old boy:)

Postby loxxrider » Fri Dec 05, 2014 5:54 pm
Dmitry, where did you get that main girdle? This piece

Attachments

image.jpg
image.jpg (63.97 KiB) Viewed 504 times

-Chris


Chris, hello.
I bought this item on Ebay - http://www.ebay.com/itm/Blockversteifun ... 5d53a47c0f

Alexey.

loxxrider wrote:Dmitry, where did you get that main girdle? This piece

Chris, hello.
I bought this item on Ebay - http://www.ebay.com/itm/Blockversteifun ... 5d53a47c0f

Alexey.

RAS 20V wrote:

loxxrider wrote:Dmitry, where did you get that main girdle? This piece

Chris, hello.
I bought this item on Ebay - http://www.ebay.com/itm/Blockversteifun ... 5d53a47c0f

Alexey.

Thanks!

Great pics.

Greg W.