The Project Pad

Posted: **Sat Mar 29, 2014 9:53 pm**

themagellan wrote:
AngryTaco wrote:Lets get these going guys! I now have a Big Chassis car now so I am REALLY motivated! Perhaps I should threaten to not do the front bushings if people dont sign up quick enough LOL

Don't let the small chassis wankers have all the fun!

Yeah.... just realized how well this worked out for us. I don't think there could be anything better than a fully locked down v8q bushings wise... Well at least aside from a 5/6 speed swap.

What do you think a whole kit Front + Rear would end up being? Do you think you'll do anything with the outer front sway bar pieces? I yearn for the day to feel what an alignment and full fresh bushies in the t44 feels like... hahaha

I think powerflex already makes just about everything but the subframe bushings. Then again I got to go through it all again

Posted: **Mon Mar 31, 2014 11:31 am**

Added you to the list nick. Just need 16 more signed up and we are rockin!

Posted: **Mon Mar 31, 2014 11:34 am**

stin wrote:Very interested ordering multiple sets to front and rear for finnish people, just bought powerflex bushings for track control arm, inner & outer, they were like 300usd shipped, could measure those so we could have near complete set. I would like to have aluminium for subframe, I dont get it why would it be more expensive then any other if you order them from a machine shop? it requires lathe anyway?

Also ordered apikol C4 subframe set, and made new inner sleeves for Typ44/D11, but would like these aluminium aswell, can measure if it helps you.

My polyurethane bushings are made from a mold, not a machine shop. This keeps the material and labor cost down as well as consistent dimensions.

Ill get with you on everything you are looking for

Posted: **Tue Apr 01, 2014 11:44 am**

Count me in for front and rear subframe sets if they make it to production.

Posted: **Tue Apr 01, 2014 11:58 am**

roortube wrote:Count me in for front and rear subframe sets if they make it to production.

You have been added to the list

Posted: **Tue Apr 01, 2014 5:23 pm**

I'm in

Posted: **Tue Apr 01, 2014 7:35 pm**

Added! Get your other audi enthuiasts on board!

Posted: **Wed Apr 02, 2014 4:03 pm**

Count 6 sets rear and front (if possible) for me =)

Posted: **Wed Apr 02, 2014 5:18 pm**

Awesome!! I will get dimensions on the front two as soon as I can and make the drawings and submit them to my supplier

Posted: **Wed Apr 09, 2014 8:45 pm**

Any movement in the last week?

Posted: **Thu Apr 10, 2014 12:37 am**

Not yet. I have a few local guys possibly interested so its just a matter of time. I only need 7 more sets ordered to be good on the tooling and first order.

Posted: **Thu Apr 10, 2014 8:06 pm**

I am officially in :beer:

Posted: **Thu Apr 10, 2014 11:35 pm**

Yay! Only 6 more people and we are rocking!!

Posted: **Fri Apr 11, 2014 10:17 am**

Count me in.

And count me in for fronts whenever they exist.

Posted: **Fri Apr 11, 2014 2:09 pm**

Sweeeeeeeeet!!!! Only need 5 more sets to be on board and I will start sending out the invoices!

Posted: **Sun Apr 13, 2014 8:34 pm**

I'm in as I need to compliment my front ones...

Sent from my HTC One using Tapatalk

Posted: **Sun Apr 13, 2014 11:01 pm**

4 more and I send out the invoices!

Posted: **Sun May 11, 2014 9:15 pm**

Any movement on these?

Posted: **Sun May 11, 2014 9:46 pm**

Still needing 4 more orders. Id pick up the slack but I just spent my remaining capital on inventory.

Posted: **Wed May 14, 2014 11:56 pm**

Hey just out of curiosity, can you 5000 people check your rear subframe for the mounting bushings? ETKA says there is a bushing but a friend is telling me there isnt a bushing between the suspension and chassis

Posted: **Thu Jul 03, 2014 11:19 am**

alright guys lets get this going again. Still need 4-5 more sign-ups. Now that I know for sure how expenses will go, the pre-order price is $80. The retail pricing is going to be right about $92.50

Lets get this going. I'm done moving and I want to get these done!

Posted: **Sat Jul 05, 2014 1:41 am**

This sounds good so put me down for a set as well.

Posted: **Sat Jul 05, 2014 12:30 pm**

I'll take a set as well.

Posted: **Sat Jul 05, 2014 12:39 pm**

When can I send $$$?

Posted: **Sun Jul 06, 2014 12:06 pm**

I will send out the PayPal invoices as soon as we get 2 more orders signed up. Were just about there

The Project Pad

t44/urS/v8 rear poly subframe bushings --PLEASE READ PG 4!

Re: Hey T44 Guys! Here is YOUR very own Bushing Thread

Re: official t44 and urS rear subframe bushings sign-up thre

Re: Hey T44 Guys! Here is YOUR very own Bushing Thread

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre

Re: official t44 and urS rear subframe bushings sign-up thre