Nick's 1991 200q Project - QUAT44RO

[amd is the best]

Transmission is just about ready to come out. Just the procon cables and the two transmission mounts.

You guys have any tricks for the cables? Should I just cut them?

A few pics:

[chaloux]

Nice valve cover

[themagellan]

My friend recently just cut them, but he is in a rush and wanted to get it done as quickly as possible.

I don't think you need to take the cable itself out, what I saw when helping him was that they are almost wrapped around the top of the transmission like a seatbelt. You need to loosen the cables to relieve the tension.

Or... I'm completely wrong

Interested in seeing how you get it done

[amd is the best]

Nice valve cover

Thanks man! Was a spur of the moment thing last year before H2O. Didn't come out too bad.

My friend recently just cut them, but he is in a rush and wanted to get it done as quickly as possible.

I don't think you need to take the cable itself out, what I saw when helping him was that they are almost wrapped around the top of the transmission like a seatbelt. You need to loosen the cables to relieve the tension.

Or... I'm completely wrong

Interested in seeing how you get it done

Sawed right through them

Transmission is out:

Old shifter assembly out:



New S6 plus shifter stuff ready to go in:



SUCCESS:



016 in all it's glory:

[85oceanic]

[amd is the best]

Thanks Ben. Also responded to your PM.

Anyone know the cheapest place to get the wastegate to downpipe gaskets? Audi part number is 857253115 but the dealer want something like $60 each. Get real.

[EDIGREG]

Yeah they're super expensive. Just get some generic exhaust gasket and cut it to shape.

[amd is the best]

Yeah they're super expensive. Just get some generic exhaust gasket and cut it to shape.

Solid idea smarty pants.

Wasn't sure if there were some cheap aftermarket replacement.

[EDIGREG]

lol. not that I know of. I've even ran without that gasket before and it never noticeably leaked

[85oceanic]

lol. not that I know of. I've even ran without that gasket before and it never noticeably leaked

HAHA that's what mine is like now. I had made a gasket but it burnt out, so now I am running without. (I did spray a bit of copper-coat on each surface just for good measure though)

[amd is the best]

Backyard mechanics I tell ya...

[EDIGREG]

vbands take care of the problem all together

[amd is the best]

vbands take care of the problem all together

You know, I was thinking that when it took me an hour to remove the downpipe!

[ringbearer]

http://catalog.remflex.com/COLLECTOR_CO ... s16511.htm

This stuff is awesome. Used on lots of hot rods, none on my car yet but it is the best exhaust gasket material I've found.

Nice job on the trans, I hope this 01E holds up better than the others you've had.

[chaloux]

I'm really looking forward to hearing your impressions of the 01e. Do you have snow still?

[loxxrider]

I use copper stuff on all gaskets rather than actual gaskets. Works like a charm as long as the surfaces are true.

[amd is the best]

http://catalog.remflex.com/COLLECTOR_CONNECTOR_Flange_Exhaust_Gasket_p/gs16511.htm

This stuff is awesome. Used on lots of hot rods, none on my car yet but it is the best exhaust gasket material I've found.

Nice job on the trans, I hope this 01E holds up better than the others you've had.

Thanks for the link. I think I will try and pull the gaskets off my spare long block if not I may end up at the dealer sucking it up, lol. Luckily they discount my purchases for being such a good customer.

I hope so too! I have high hopes.

I'm really looking forward to hearing your impressions of the 01e. Do you have snow still?

I'm pretty excited to see how well it does myself. I slightly concerned with the lenght of 2nd gear, but we'll see. No snow really left here however there's noise about an approaching storm

[EDIGREG]

I love the 1.89 second gear personally... probably my favorite WOT gear

[amd is the best]

I love the 1.89 second gear personally... probably my favorite WOT gear

I worried about falling out of boost 1st to 2nd.

[chaloux]

I love the 1.89 second gear personally... probably my favorite WOT gear

Oh fo sho.

Gearing makes such a huge difference (and weight). I was able to break traction in first and second on dry pavement in the 4k with who knows how much power. In dad's car that was only happening in the wet, and even then a struggle. With ~600hp. A full 2500+rpm WOT rip in 2nd is just glorious.

Jelly.

Actually, we've got a spare (and two in cars) 01E at the shop...

[EDIGREG]

well that's pretty much inevitable, unless you slam it into second which these transmissions obviously don't like. But that's what ALS/no-lift is for

[amd is the best]

I'll be testing the 1-2 hard shifts without a doubt. As you guys know, I enjoy launching the car often.

[loxxrider]

meh, you should be launching in second gear anyway

[EDIGREG]

[amd is the best]

meh, you should be launching in second gear anyway

LOL! Shit would BREAK!