The Project Pad

Complete mars on chocolate URQ part out. Some parts stay but most are available. PM with wants and/or needs.

CQ part out in progress. PM if there are particulars you are after. Some prices and a few images. All prices do NOT include shipping unless specifically stated otherwise.

RS2's (and under headlight trim) $650 SOLD!

S2 front bumper, S2 lights (hella's), Engine underbelly tray, washer hoses,(like to sell as a set) $700 SOLD!


S2 rear bumper $350
B4 hood-$100
Badgeless grill for the B4 hood-$75

S2 intercooler-$200
S2 crossmember-$200
S2 oil pan extension new and never mounted (the one with the tapped whole for oil return)-$45

ABY intake mani hogged by Iroz Motorsports-$650 GONE!

Have a complete charge piping/silicone coupler set to work with 3B/ABY/ADU manifold, S2 crossmember, S2 intercooler, K24/K26-$50 SOLD
034 Phenolic spacer for 20V I5 mounted but never run-$50 SOLD!
Apikol AAN vented coil cover-$30 SOLD!
ABY fuel rail, fpr, lines-SOLD!
AAN motor with ~95k original miles $1250 for the long block GONE!

Eurovan tall deck block and crank-$400



7A cams-$300
ARP headstuds- SOLD!
AAN harness integrated to the CQ -$300 GONE,
AAN DME-$300
Two chipsets (Stage 1ish?) (RS2+ by Swann) $200, and $250 respectively
Innovate LC1 controller $65 SOLD!


Fenders
CQ Mirrors-$25 a piece
Blacked out tail lights and center section (best image i have currently)

Factory front mud flaps-$50 SOLD!

Parcel shelf-$25 (its red like most of the interior trim in this car)
G60's-$50
ATE power slots front and rear-never used-$75 fronts, $50 for rears
URS4 rear calipers and carriers, for vented BBK on rear of CQ's-$100
Complete fender liner set-$40
Late style turn cluster with trip computer controls-$25
JHM solid shifter-$200
Various interior bits
Single wiper motor assembly-$25
Valve cover gasket set-$20
Valve cover gasket and 7a accessory belt set-$30
URS4/6 metal ended intercooler-$50
Team Dynamics 17X7 4X108 $290

urq complete interior, some random initial shots:

Got a few, not very good images. But here they are:

Whats is the deal on the part out?

IIRC, he has a urQ inbound and I may have planted the 07K seed

Track car motivation for the urq, nice parts on the car it doesn't need and other urq owners with truly nice examples may benefit from. And whether stroked tall deck, or 07K, sellin parts is about my only budget these days!

Is the car there? Send me some pictures of the door cards when you get a chance.

Hank wrote:Is the car there? Send me some pictures of the door cards when you get a chance.

Finally got here yesterday.

I'll send/post pictures of the cars, but they are pretty doggone good. Pockets, leather, etc!

Send me some pictures of the cards and the rear seats.

Hank wrote:Send me some pictures of the cards and the rear seats.

Pictures of cards and rear seat posted.

Micah, are you going to go with 2-piece struts as part of the track mods for the UrQ ?

Quattro v1.0 wrote:Micah, are you going to go with 2-piece struts as part of the track mods for the UrQ ?

Yes.

Sean, Martin asked if i or anybody close was going to Carlisle. Any of yous guys going?

Lets work on a deal for the rear seats, cards, and rear seat belt assemblies.

Lets.

Might be interested in the front uprights and the rear subframe (assuming sway bar) if it's in good condition... ours are a lil rusty!!! PM me w/ details if available.

Have inquiry in the rear subframe currently, but it is not sold. Front uprights available too. Both in what i would call good shape. (NOT rusted) PM me a fair offer.

I'd like at least one of the rear tie rods as long as they are the older style please.

Quattro v1.0 wrote:I'd like at least one of the rear tie rods as long as they are the older style please.

One of the NLA tie rods?! ;-) Sure thing. Send me a fair offer and it's yours.

Okay. Sean, did you change your min about the tie rods? Never heard from you....

Some images added.

Added virtually brand new JHM solid shifter, and Team Dynamics wheels.

I am still interested in that S2 bumper.

Thank you
Martin

Hey, Martin! Still haven't come up with any better rate anywhere..... :-(

Can you try these guys? They have cheap pallet shipping, I can pick it up at their warehouse here in Toronto.

http://forwardair.com/locations/falocations.htm

Cheers
Martin

I want the rear seat. Do you plan to be at BBQ? Will send pm in a few on some of the other wanted parts

AngryTaco wrote:I want the rear seat. Do you plan to be at BBQ? Will send pm in a few on some of the other wanted parts

I HOPE to make BBQ4. If i have parts i HAVE to deliver it makes it that much easier for me to make a case for my NEED not WANT to be there!

Interested in the intake parts. (Crossmember, manifold, Intercooler, hoses) still available? Pm sent

Replied. Need to get around to updating. PM with any inquiries as the first post is out of date. Lots still remains. Some items have sold. I'll get to it when i can do so on something other than my phone.