The Project Pad

Hey guys! I bought a second CGT about 6 or so months ago because it fell into my lap for dirt cheap. So at this point I yanked the engine, junked the auto trans because, well, it's an auto, took the driver's side door panel and window regulator and also the drivers side taillight circuit board. I'll post pictures as soon as I can get over to my friend's (where the car is being held for me) of what's left and in what condition its in. The only things that I'm not willing to let go of are the wheels, head light housings, tail light housings, subframe and steering rack. I guess just let me know what you need and I'll let you know if I can get it for you. i'm also willing to sell off ALL OF THE GLASS except THE WINDSHIELD! The glass will also fit a urQuattro. So PM me if you need anything! I know how much of a bitch it is to find parts for B2s so I want to help out the 4ring community!

What happened to the old driver's side window regulator, still have it?

Looking for headlamp switch. Also, may be interested in PS arm rest with the hardware.

Sent from my Nexus 4 using Tapatalk

I could use the carpet, but shipping across the US would probably be killer :(

What's the trim on the doors look like? Noticed mine are starting to get wavy, wouldn't mind some straight ones.

Here are a few pics. If anyone needs any pics of anything specific let me know!





Crap quality but it's the CIS distributor and the original airbox, throttle plate etc

carl wrote:What happened to the old driver's side window regulator, still have it?

I swapped it into my daily driver, I still another motor that works but the cable on the old regulator got jammed in the motor and bent the bar. I resurfaced the plastic wheel on the inside when I initially wanted to rebuild the old regulator but ended up getting the parts car before that.

IslandRinger wrote:Looking for headlamp switch. Also, may be interested in PS arm rest with the hardware.

Sent from my Nexus 4 using Tapatalk

I'm sure I could pull them for ya next time I'm there. I'll dm you once I do in the next week or so.

alxdgr8 wrote:I could use the carpet, but shipping across the US would probably be killer :(

Do you mean the actual main salon carpet? There's a small tear where the handbrake assembly sits, but it is covered by the stock handbrake boot. I get pretty good rates on shipping, I used to work for a forwarding company that still lets me use their shipping rates, basically a big discount on USPS.

alxdgr8 wrote:What's the trim on the doors look like? Noticed mine are starting to get wavy, wouldn't mind some straight ones.

Previous owner hacked into the panels to install speakers in the doors and did a pretty shit job, but most of the actual plastic trim seemed alright I can take some close ups sometime this week

Looking for the trim on the center of the outside of the door.

Sent from my Nexus 6P using Tapatalk

alxdgr8 wrote:Looking for the trim on the center of the outside of the door.

Sent from my Nexus 6P using Tapatalk

Passenger side has already been sold, drivers side is still available.

Also looking for: steering column clamshell(?), Passenger side interior door arm rest and mounting hardware, seat tilt cables, and potentially interested in CIS distributor.

Sent from my Nexus 4 using Tapatalk