Your dream built, bored out, high boost, stroker engine.

chaloux · Post by **chaloux** » Tue Jun 18, 2013 10:19 am

Unassembled. Add $900 for assembly and machining of block.

-236mm tall deck block
-NLA 92.8mm crank
-New Iroz 160mm rods
-New coated rod and main bearings
-New Wiseco 82.5mm coated top & skirt 8.1:1 pistons
-New Iroz I5 tubular exhaust manifold
-New 12mm ARP head studs
-ARP main studs
-10k km (yes, since NEW) ported head with new +.5mm exhaust valves, high rate springs, new seals etc
-7a cams
-could include new Iroz downpipe. Built for quick spool valve geo in a UrS chassis, vband/Stromung fitment
-could include ported and gutted AAN intake manifold

This setup will rev to 8500rpm or whatever you feel safe taking the stock oil pump to. Ideally this would be a high boost (over 30psi) pump gas engine. Ie. Big turbo in its higher efficiency range.

$5k plus assembly mentioned above if desired

20VAvant · Post by **20VAvant** » Tue Jun 18, 2013 2:37 pm

Do small children count as currency....?
If so, I'll take it.

Wish I had money and a second car for that.

PRY4SNO · Post by **PRY4SNO** » Wed Jun 19, 2013 9:05 am

oh em gee

i do not fn want to see this right now

PRY4SNO · Post by **PRY4SNO** » Tue Jun 25, 2013 4:21 am

amd is the best · Post by **amd is the best** » Thu Jun 27, 2013 3:15 pm

I should buy all.

chaloux · Post by **chaloux** » Thu Jun 27, 2013 3:37 pm

Dis + 3586/6466 +qsv +35psi.... Just saying

on my stinking phone!

amd is the best · Post by **amd is the best** » Thu Jun 27, 2013 3:57 pm

chaloux wrote:Dis + 3586/6466 +qsv +35psi.... Just saying

on my stinking phone!

3794

Post by **EDIGREG** » Thu Jun 27, 2013 7:39 pm

3794 would have a pretty tiny power band with an 8500rpm redline

chaloux · Post by **chaloux** » Thu Jun 27, 2013 7:41 pm

2.5l + qsv... Shouldn't be too bad

on my stinking phone!

chaloux · Post by **chaloux** » Thu Jun 27, 2013 7:43 pm

5500-6krpm and over 800hp. :dunno:

on my stinking phone!

PRY4SNO · Post by **PRY4SNO** » Fri Jun 28, 2013 4:12 am

amd is the best wrote:I should buy all.

You'll have to scoop up what crumbs are left after I'm done.

I've phoned in my order to Matt directly and am awaiting a final price.

amd is the best · Post by **amd is the best** » Fri Jun 28, 2013 4:35 am

I can't buy anything right now anyway :(

Post by **Hank** » Fri Jun 28, 2013 7:52 am

chaloux · Post by **chaloux** » Fri Jun 28, 2013 10:16 am

So it looks like, pending sale to Dustin, that we'll have a new Hank header with egt on cyl 5 and vband with tial setup for sale. $1100 shipped today :-)

Also a new Hank downpipe for qsv on a UrS car, $400 shipped.

Lastly, new supertech +.5mm inconel exhaust valves and high rate valve springs. $250 valves, $200 springs

on my stinking phone!

chaloux · Post by **chaloux** » Mon Jul 29, 2013 12:25 pm

Bump, the engine is Dustin's. The above is for sale as mentioned. New thread maybe?

Your dream built, bored out, high boost, stroker engine.

Your dream built, bored out, high boost, stroker engine.

Re: Your dream built, bored out, high boost, stroker engine.

Re: Your dream built, bored out, high boost, stroker engine.

Re: Your dream built, bored out, high boost, stroker engine.

Re: Your dream built, bored out, high boost, stroker engine.

Re: Your dream built, bored out, high boost, stroker engine.

Re: Your dream built, bored out, high boost, stroker engine.

Re: Your dream built, bored out, high boost, stroker engine.

Re: Your dream built, bored out, high boost, stroker engine.

Re: Your dream built, bored out, high boost, stroker engine.

Re: Your dream built, bored out, high boost, stroker engine.

Re: Your dream built, bored out, high boost, stroker engine.

Re: Your dream built, bored out, high boost, stroker engine.

Re: Your dream built, bored out, high boost, stroker engine.

Re: Your dream built, bored out, high boost, stroker engine.