Ben's Oceanic 4kqt - BBQ X readiness - The last year

Squam · Post by **Squam** » Mon Apr 13, 2009 5:24 pm

Want to sell your spare lens to an oceanic blue brother?

PxTx · Post by **PxTx** » Mon Apr 13, 2009 5:51 pm

There are several appraoches to a build. If you are talking a build while still in school, I would say take an appraoch that is focused and reasonable.

400 hp is attainable with a stock motor and the GT3071 seems to be the prefered turbo to reach that goal. I recommend getting the 20vt on the road and driving and then work on adding hp. Driving the car is a great reward, especially when you are still young. Some of these builds can take years by tryng to do everything perfectally.

85oceanic · Post by **85oceanic** » Mon Apr 13, 2009 6:12 pm

Yeah, builds taking a long time is nothing new to me, being that I have done several old ones with my dad, like a 1957 International A120 truck, couple of gmcs, chevs and the like. I do agree getting the motor in first would be a major achievement at this point, so I think that is a really good idea, it is discouraging seeing it sit out their all the time with no real progress, even though it feels like I am throwing money at it right and left haha. Anyways, I am like always open to suggestion, and opinions. Thanks everyone!

Squam wrote:Want to sell your spare lens to an oceanic blue brother?

yeah, I can once my new ones come in for sho.

rallynz · Post by **rallynz** » Mon Apr 13, 2009 6:50 pm

+1 for La Grande!

dubsmith · Post by **dubsmith** » Mon Apr 13, 2009 9:33 pm

Seems like there are an awful lot of Orygun folks around here. More popping up all the time!

85oceanic · Post by **85oceanic** » Sat May 02, 2009 3:57 pm

Just a little tiny update...

I am still working on getting my replacement lense for the pass side, but in the mean time I have been working up a projector set up, I hope it works out ok. I didn't destroy the original reflectors just in case I didn't like the look, but I am thinking it will come together ok...

Also started my batt. relocation

and while I was at it decided to work on cleaning up the interior some... I still need to work on these old old stains...

85oceanic · Post by **85oceanic** » Mon May 04, 2009 8:53 am

Getting closer to a finished product for the headlights...

:-D

my2000apb · Post by **my2000apb** » Mon May 04, 2009 9:33 am

looks really nice!! im looking at something like this in my 4k. so thats jsut low beam?

85oceanic · Post by **85oceanic** » Mon May 04, 2009 1:01 pm

Yeah it's just for the low beam, and i am going to go Hi-Def with it as well with either 8000k or 6000k. I hope it turns out looking good. :roll:

my2000apb · Post by **my2000apb** » Tue May 05, 2009 6:23 am

any reason you didnt go bi-xenon?

85oceanic · Post by **85oceanic** » Tue May 05, 2009 5:11 pm

I really thought about it, but they cost a lot more and I got these ones on the cheap. If I find a set later on down the road, i might go bi-xenon. :roll:

85oceanic · Post by **85oceanic** » Mon May 11, 2009 2:46 pm

Projecto headlights are in on the driver side, and I am still waiting for the lense on the passenger side, other than that I am pleased with how they turned out. Now all I need to do is get my HID conversion YAY! :-D

85oceanic · Post by **85oceanic** » Tue May 12, 2009 1:41 pm

Here are some good better pics ...

Enjoy!

85oceanic · Post by **85oceanic** » Mon Jun 01, 2009 7:08 pm

SOOOO I bought a new DD car:

1991 Honda Prelude 4WS SI it's a pretty interesting car. A tad rice, but not to bad. The interior is in great condition and what not. A kid owned it along the way and did a crap job of a stereo install, so I have been reverseing that, and taking care of some other odds and ends it has. The 4WS for those who don't know preludes means it has four wheel steering which is pretty sweet. This one has also been lowered about 1.5 to 2 inches I am thinking. I parked next to a non SI and mine made it look like a 4x4. haha. Here are a couple of pics for viewing pleasure...

*The POS is now sold! I now hate honda*

Anyways, Back to business.

I FINALLY got my headlight lense from Deutschland and guess what.... wrong one. I recieved a CUBIE rather than the HELLA I needded. Also I never truelly appreciated the differences between the two intill now, and wow .... i don't like them... :bashtard: It makes the front look way to square in my opinion. But I did go on ahead and install them because I needed somkind of encouragement. (Sorry now pics yet) I ordered these bastards in january and I am still having issues. Anyways, he just got in a set of NOS replacement lenses he is going to sell me on the cheap so that is good. I also have been working on the interior some more. I think I will be done with the carpet cleaning after one more shampoo. Anyways, sorry for the wordy update. I need to spend more time on the car and less on my butt. :roll:

... on a side note... I promise not to crazy on the honda. I like it but it is no 4kq... :-D

85oceanic · Post by **85oceanic** » Wed Jun 03, 2009 9:18 pm

What it looks like at night....

Audi Otter · Post by **Audi Otter** » Thu Jun 04, 2009 12:49 am

WTG on the Prelude:D If me mem is correct I think the 88-91 Si have a carbon fiber piston sleeves too. Crazy Honda...

The first gen mech style 4ws is the best way to go.

The post 92-96 electro sucked and are costly to fix. I only fix one while working at the dealer the reast of the 20 or so I just locked them cuz the customer didn't want to pay for a new unit.

If you need any help with the Prelude PM me, I still have access to Honda's Tech site and phone line.

oh FYI. When you adjust valves be careful not to pop the rocker out, no biggy if you do, its just kinda hard to shove back in. Also all Preludes valve adjustment are very temperamental meaning 1/8 of a turn to tight or to loose and it runs like shit. Trust me I made a living working these cars. Last the 4WS was ment to help with parking and lane change as I recall the Honda Proformance Video stated. Beaware that in the slick the car may not act the way you want. I had fun learning that.

Just cahnge the oil and coolant and it should treat you right.

Audi Otter · Post by **Audi Otter** » Thu Jun 04, 2009 12:50 am

I like what you did with 4k headlamps. REALLY like the LED's :thumbsup:

:cheers: :jawdrop:

85oceanic · Post by **85oceanic** » Thu Jun 04, 2009 7:25 am

thanks for the info on the Lude man! I really appreciate it!!! :-D

85oceanic · Post by **85oceanic** » Mon Jul 27, 2009 8:55 pm

So, I have been slowly plucking away at the audi, this is what I have got done....

Progress

and

oh and on a side note, I finally have all my ecode crap worked out and got ride of the cubie style and got the hella style! Yay!

85oceanic · Post by **85oceanic** » Mon Nov 02, 2009 10:41 am

ok, so just a little update. I have been gathering parts for my 20vt swap. I still am engineless and I need to be finding a 3B soon. I have pretty much finished my bat relocation and what not too so in the mean time i have been playing a bit with the brakes and suspention. I have a couple of questions about running EBC rotors and pads rather than upgrading to big reds. I really want to do porsche upgrade but I was wondering if anyone has had good expierence with the EBC stuff and how it compairs to the porsche stuff.

No pics either because I managed to drop my digi cam in the ocean last time I was there :bashtard: so pics will come as soon as I get a new camera.

85oceanic · Post by **85oceanic** » Fri Feb 05, 2010 1:06 pm

Ok so ya, again my project isn't totally dead. I have been SLOWLY gathering parts, but mostly I have been holding out for a donor car and I may have a lead on one Oregon. I'm crossing my fingers, hope it hasen't sold! :-D

NoQuattro · Post by **NoQuattro** » Fri Feb 05, 2010 9:22 pm

How is the beam pattern behind that fluted glass? I've gone back and forth over adding projectors to my lights a few times. Have you aimed the lights at a wall yet and looked? Sharp cutoffs?

85oceanic · Post by **85oceanic** » Sun Feb 07, 2010 7:19 pm

Yea they are pretty sharp. I really really like it

85oceanic · Post by **85oceanic** » Mon Mar 29, 2010 5:16 pm

Finally a real update and boy does it feel good! SO my AAN ships out today from Oklahoma so that's good news. I have made major headway with getting the engine pulled and now I am preping it to recieve to donor. I still have a long list of parts to pick up, all to happen soonish. I know my thread is at a snails pace. I hope to make more signifigant progress as to make it more interesting for me and you guys! Anyways here are some pics for some entertainment I hope!

Painted up my 7A vc (thank you Derek for the vc!)

Pulled the engine (boring and painful) and used redneck engineering to make up a POS body roll around (crappy cell phone pic to boot):

My retarded mess :bashtard: :

Now I go clean up ( I also removed a bunch of the pics off earlier posts). I am sick of needing to scroll so much. haha

85oceanic · Post by **85oceanic** » Wed Apr 07, 2010 12:27 pm

Ok so I picked up a Turbosmart diverter valve from a buddy for 20 bucks. :-D He originally bought it for his eclipse but ended up buying a bigger T-smart one. Opinions/thoughts on the piece? Has anyone here used one before?Also I am slightly unclear as to if an AAN uses a BOV or Diverter valve. Also what are some of the advantages or disadvanages to each one?