24vVR6T CQ Project: EATSGTR rear firewall fab.

[ChrisAudi80]

death 4kqt wrote:[/quote]this thread needs more pertinent pics

[/quote]

[my2000apb]

first page updated

[my2000apb]

first page updated

i jsut put 100+ chassis pics up on the first page, please check them out

we are pretty much up to date so all further updates will be on the last page

[Toph]

Mmmmmanifold

That's a 3" velocity stack for sizing reference...ought to be plenty of volume

Attachment ( 26263 ) : 2011-04-26_21-24-27_598.jpg

[my2000apb]

yes manifold fabrication has begun
update to come

[Hank]

Animals. Bloody nice work. Jealous of the rear diff.

[my2000apb]

Animals. Bloody nice work. Jealous of the rear diff.

its something you could do

torsen or locker in a sub 30 minute swap

ah the decisions


did you get my txt about the rail injector size?

[jbrentd]

nice project...subscribed

[Highlander]

Sweeeeeeeeeeeeeet!

This is going to be a good one. My favorite kind of build........HARD CORE for sure.

Great workmanship guys.......I'll be following this closely.


Thanks for sharing

:cheers: :cheers:

Craig Cook

[varia]

Subscribed......

but post more info/pics plz!

[my2000apb]

thanks guys, ill be home tomorrrow and many pics to come
intake manifold fabbage
subframe, lots of mods = might as well be reconstruction, i will def be making a fullcustom tubular subframe once shes up and running
id like to tuck it up into frame a bit more and raise c-arm mounting postions
valve cover mods

front radiator / fmic plans

[Highlander]

thanks guys, ill be home tomorrrow and many pics to come
intake manifold fabbage
subframe, lots of mods = might as well be reconstruction, i will def be making a fullcustom tubular subframe once shes up and running
id like to tuck it up into frame a bit more and raise c-arm mounting postions
valve cover mods

front radiator / fmic plans

Now your just teasing

:slap:

[my2000apb]

Now your just teasing

:slap:

yup hehehe i suck

the pics are worth the short wait

[audidub]

speaking of intake you get the stock cut for the runners??

[autoholic]

Damn, nice car. You guys do some amazing work. I'd love to check that thing out sometime.

[my2000apb]

Damn, nice car. You guys do some amazing work. I'd love to check that thing out sometime.

thanks, swing by, youre barely an hour away

speaking of intake you get the stock cut for the runners??

yup ready for your skillz

[my2000apb]

well i have some extra plenum stock, ~6" so im thinking i might buy one more alum. hemisphere and make a coolant expansion tank.

[a_CQ]

Why? It will be 10 times heavier than OE plastic ones that work just fine. Get a smaller ball size one form newer VW/Audi if you need realestate.

Why not build/raise the subframe right away vs. later on??

[my2000apb]

Why? It will be 10 times heavier than OE plastic ones that work just fine. Get a smaller ball size one form newer VW/Audi if you need realestate.

Why not build/raise the subframe right away vs. later on??

well firstly, it def wont weight 10x a stock plastic one, it will be a bit heavier, but also show me a way to attach AN fittings to the plastic resevoir.

if i come into extra time etc ill start building a subframe, right now the modified one works and will work fine to get the car rollign and driving, i can take a bit of material off of the upper portion of the subframe bushing to tuck the subframe a bit more. i will start building the v1.1 versions of parts once its further along and being refined not built first time around

[my2000apb]

Update time,
Motor is back in for a short time

The vr6 24v valve covers have a bump in them for the breather. The valve cover is from a transverse application. As you can see in the pics the VC has to be trimmed down so its not interfering with the hood. So I cut the breather portion off and made an aluminum plate to block the opening off.

Its now tig’d up by Ryan @ Higbee fab, and its back on car to test fitment.

i will be replacing the breather that i removed, probably with one large or two midsixed bungs off the front-facing oil filler cap hump thats in the VC.

so, a few breather bungs, some powdercoat and its good to go

[my2000apb]

More update!!
So I finally got a chance to tear into the cylinder head that I will be running. Its going to be stripped of all components, ported to r32 intake sizing (more on that to come), cleaned up and rebuilt.

The head has 68k miles and looks pretty clean

On to the PICS!!!

[fasterthenrs2]

nice project me like

[Hank]

Gonna be a ripper

[audifreakjim]

:bump:

[my2000apb]

:bump:

does jimmy wnat an update?:)
ive got some juicy pics