Ben's Oceanic 4kqt - BBQ X readiness - The last year

AngryTaco · Post by **AngryTaco** » Tue Jul 23, 2013 12:12 am

Needs moar boost

chaloux · Post by **chaloux** » Tue Jul 23, 2013 8:18 am

I luv dis car. One of us needs to make a trip out to the other's coast for an event so we can hang

85oceanic · Post by **85oceanic** » Tue Jul 23, 2013 9:27 am

AngryTaco wrote:Needs moar boost

Yes indeed and all the ingredients needed should be here very soon for just that.

chaloux wrote:I luv dis car. One of us needs to make a trip out to the other's coast for an event so we can hang

Thanks! And I totally agree Matt!! Once Oceanic is fully sorted, wide bodied and painted I plan on making the trek to Carlisle.

busmn280 · Post by **busmn280** » Tue Aug 20, 2013 1:30 am

Ben,

That's a really cool 4K that you have built! I like your choice in parts and the way it has come together. Your transmission explosion was amazing! I've never seen carnage like that before! Your car is crazy fast with it's current setup. I can't even imagine what a rocket it will be with the 5857! I will be waiting for some great kill stories! Keep the vids coming too!

AngryTaco · Post by **AngryTaco** » Tue Aug 20, 2013 12:13 pm

Just wait till he gets a set of HPR camshafts in there

chaloux · Post by **chaloux** » Tue Aug 20, 2013 12:54 pm

You gonna make cams for the 20v? Any idea on pricing?

AngryTaco · Post by **AngryTaco** » Tue Aug 20, 2013 2:42 pm

Retail Im thinking around $325 with exchange. I need OEM camshafts

chaloux · Post by **chaloux** » Tue Aug 20, 2013 3:13 pm

AngryTaco wrote:Retail Im thinking around $325 with exchange. I need OEM camshafts

Looking for a guinea pig?

Mcstiff · Post by **Mcstiff** » Tue Aug 20, 2013 3:52 pm

AngryTaco wrote:Retail Im thinking around $325 with exchange. I need OEM camshafts

What engine?

AngryTaco · Post by **AngryTaco** » Tue Aug 20, 2013 4:07 pm

AAN/3B and N/A 7A. Each grind will be a case by case basis as I adjust for everyones build. I will have certain specs in stock over time. If I get enough interest, eventually Ill start investing in new billet camshafts. Ben and I are working out what to do with his as his build is incredibly complicated. At this time Im keeping those specs to myself until after he shits his pants

Mcstiff · Post by **Mcstiff** » Tue Aug 20, 2013 4:21 pm

Cool, I have a pair of 3b cams sitting around but my build direction is TBD.

AngryTaco · Post by **AngryTaco** » Tue Aug 20, 2013 4:39 pm

chaloux wrote:
AngryTaco wrote:Retail Im thinking around $325 with exchange. I need OEM camshafts

Looking for a guinea pig?

Matt get with me and we can discuss it. I would love for peoe to test out what I have in mind

AngryTaco · Post by **AngryTaco** » Tue Aug 20, 2013 4:42 pm

Mcstiff wrote:Cool, I have a pair of 3b cams sitting around but my build direction is TBD.

Get with me and we can discuss what would work for your build.

Its easy with Ben because he has a direction which is basically MOAR POWAH. Thats easy. Combining driveability with power starts becoming hard

85oceanic · Post by **85oceanic** » Tue Aug 20, 2013 11:07 pm

busmn280 wrote:Ben,

That's a really cool 4K that you have built! I like your choice in parts and the way it has come together. Your transmission explosion was amazing! I've never seen carnage like that before! Your car is crazy fast with it's current setup. I can't even imagine what a rocket it will be with the 5857! I will be waiting for some great kill stories! Keep the vids coming too!

Thank you busmn280! Oceanic is still a major work in progress, I can't wait to see it with all the new goodies from HPR,IROZ and EFIxpress! I will be SUPER happy if I hit 500ish wheel. And, I promise, kill stories/videos will be coming. I already have my eye on a few local cars.

AngryTaco wrote:Just wait till he gets a set of HPR camshafts in there

I can't wait either man, with the specs we are talking about it's going to be meaner than hell.

BTW I gotta call you.

busmn280 · Post by **busmn280** » Wed Aug 21, 2013 12:08 am

500 whp in such a light car as the 4K will be pure insanity! :foff:

I guess you will be stress testing more drivetrain components for the rest of us then! Can you imagine how hard your car would launch with slicks and launch control? Soon after that Hank will have to make some custom axles for it!

85oceanic · Post by **85oceanic** » Wed Aug 21, 2013 12:39 am

I guess while I'm here I should update this sucker.

For starters, I'm making some modifications to my AWIC. For now the heat exchanger is going to become a honda civic radiator. This is only temporary in order to get me to BBQ. After BBQ I can really buckle down and make the changes I really want to. I would post pics, but I totally spaced them, and where it's a temporary set up, it's nothing special to look at.

Along with working on the AWIC I installed my new motor mounts from HPR. I was tired of hitting the hood (under load) with the 034 ones, and after one or two times, I had enough of that, so it got these little beastly gems...

OH side note: My 034 ones had not separated, as it turns out I think I was making enough torque to just flex everything upward enough to smack the hood. I was running the 034 track density with their full front poly sub mount with bracket. I really thought I had the engine locked down enough... apparently not.

While I was dinking around, I took a few minutes and finished converting the 01E to a manual speedo.

SO, other than that not much to report. I did a bunch or wiring clean up because I had a complete cluster-EFF under the hood behind the motor. It's still not where I want it to be, but for now it will do. I'm getting super stoked about my IROZ parts showing up, I really think this next set up is going to breath a whole new life into Oceanic. I can't wait!

EDIT: I just realized I have less than two months until BBQ. :boom:

Hopefully a substantial update happens soon.

85oceanic · Post by **85oceanic** » Wed Aug 21, 2013 12:40 am

busmn280 wrote:500 whp in such a light car as the 4K will be pure insanity! I guess you will be stress testing more drivetrain components for the rest of us then! Can you imagine how hard your car would launch with slicks and launch control? Soon after that Hank will have to make some custom axles for it!

I cannot wait to experience that!!!

Post by **Hank** » Wed Aug 21, 2013 2:57 pm

To a door near you realllllly soon, like maybe today

chaloux · Post by **chaloux** » Wed Aug 21, 2013 3:06 pm

Hank. Grr. I need to stop dreaming of your manifold and stuff.

Must. Get. Off. Internet

chaloux · Post by **chaloux** » Wed Aug 21, 2013 3:13 pm

The worst part is that there's a downpipe, manifold, and tial MVR sitting on the shelf. Fox

85oceanic · Post by **85oceanic** » Wed Aug 21, 2013 4:19 pm

Hank wrote:

To a door near you realllllly soon, like maybe today

DUDE, now that's the update I'm talking about!!!

I can't wait to see it in person!!!

chaloux · Post by **chaloux** » Wed Aug 21, 2013 4:21 pm

You will be impressed. Trust me

85oceanic · Post by **85oceanic** » Wed Aug 21, 2013 5:00 pm

chaloux wrote:You will be impressed. Trust me

I have no doubt that I will be.

AngryTaco · Post by **AngryTaco** » Wed Aug 21, 2013 6:46 pm

That looks like itll flow very well. Perfect for the cams Im setting you up with

85oceanic · Post by **85oceanic** » Wed Aug 21, 2013 7:11 pm

AngryTaco wrote:That looks like itll flow very well. Perfect for the cams Im setting you up with

Ben's Oceanic 4kqt - BBQ X readiness - The last year

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E time - WB Opinions?

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E time - WB Opinions?

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E time - WB Opinions?

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E time - WB Opinions?

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E time - WB Opinions?

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E time - WB Opinions?

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E time - WB Opinions?

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E time - WB Opinions?

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E time - WB Opinions?

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E time - WB Opinions?

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E time - WB Opinions?

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E time - WB Opinions?

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E time - WB Opinions?

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E time - WB Opinions?

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E time - WB Opinions?

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E time - WB Opinions?

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E time - WB Opinions?

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E - w/ some Progress

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E - w/ some Progress

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E - w/ some Progress

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E - w/ some Progress

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E - w/ some Progress

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E - w/ some Progress

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E - w/ some Progress

Re: Ben's Oceanic PTE5857 AAN 4kq - 01E - w/ some Progress