Tablet size for display?

Discuss VEMS and other standalone ECUs
Post Reply
deaner
Posts: 217
Joined: Sat Feb 28, 2015 10:44 pm

Tablet size for display?

Post by deaner »

Hey all! I'm planning on getting vems for my race car build this spring and am wanting to use the vems display(droid) setup as my main gauge set. Figure I'll have dummy lights for the critical stuff at race speed anyhow, so it's not like the tablet will be constantly watched. Unless I'm streaming netflix waiting in line for the next stage to start..... :)

What size tablets are you guys using? 7" seems so small to me. I'd love to run a big ass 10" tablet but room isn't looking like it will allow. I honestly haven't held or played with many tablets aside from my iPad so I genuinely have no clue. I plan on checking out a few this upcoming week just to get an idea of size. This will be installed where the 4kq cluster is. Not sure if I want to leave the stock bezel/switches and run a smaller tablet or yank that, mount a knob for the headlights in the center panel and run a bigger tablet. Thoughts?
User avatar
88a5tq
Posts: 1553
Joined: Wed Jul 16, 2014 10:27 pm

Re: Tablet size for display?

Post by 88a5tq »

Wow that looks great! If it's AIM brand maybe it is AIM (Com method?) Compliant with VEMS too? Awesome tho.

To five an idea, my 7 in asus tablet is just big enough for my lambda and boost gauges and a very small IAT digital readout in between that can be read from the center dash while sitting normally. Of course that isn't directly in front of me. I would go 8 or larger for sure if space allows.
1991 Audi 200q Holset
1991 Audi 200q Felbaum'd
1988 Audi 5000 TQ
User avatar
pilihp2
Posts: 1106
Joined: Fri Mar 01, 2013 2:18 am
Location: Reno, Nv

Re: Tablet size for display?

Post by pilihp2 »

I Need That AIM dash.


:drool:
-Phil
87 5ktq - 20vt
91 v8 5spd - Why?
05 S4 - Gone and very much so forgotten
14 TDI Touareg

-Terrible at responding to PM's
carl
Posts: 154
Joined: Thu Mar 07, 2013 11:05 am

Re: Tablet size for display?

Post by carl »

I've had experience an iconia w4, 8" not bad but tuning without a pen will be a pita and doesn't support charging while using usb. For gauges, as long as your display is ips you should be ok. Hp stream 8 seems like a good deal with 4g imo.
deaner
Posts: 217
Joined: Sat Feb 28, 2015 10:44 pm

Re: Tablet size for display?

Post by deaner »

Thanks for the replies guys! I'm def leaning towards an 8" or bigger now. Some crap came up that's eating into my vems fund for now so I may end up running cheap I gauges to hold over until I can get caught back up.

Is there a certain speed or spec I should be aware of when shopping for a tablet for this? I'm not to hot with electrics it seems haha. Something I'm learning about slowly... Whatever tablet I go with will literally only have one job, to display info from the ecu. I just want something that can keep up.
User avatar
alxdgr8
Posts: 1056
Joined: Thu Feb 28, 2013 1:39 am
Location: Seattle, WA

Re: Tablet size for display?

Post by alxdgr8 »

pilihp2 wrote:I Need That AIM dash.


:drool:


Only $2600!
-Alex-
@vexartmedia @odd.cylinders @5cylinder_porsche
Odd Cylinders YouTube Page
1992 Porsche 968 (07K transplant in progress)
1983 Aud UrQ (MC1, GT2871R, IIc)
1985 Audi 4kq
2003 Audi S8 (Avus/Oxblood; DD; 6MT swap)
User avatar
pilihp2
Posts: 1106
Joined: Fri Mar 01, 2013 2:18 am
Location: Reno, Nv

Re: Tablet size for display?

Post by pilihp2 »

alxdgr8 wrote:
pilihp2 wrote:I Need That AIM dash.


:drool:


Only $2600!


Yeah that google search sure hurt. :wah:
-Phil
87 5ktq - 20vt
91 v8 5spd - Why?
05 S4 - Gone and very much so forgotten
14 TDI Touareg

-Terrible at responding to PM's
User avatar
88a5tq
Posts: 1553
Joined: Wed Jul 16, 2014 10:27 pm

Re: Tablet size for display?

Post by 88a5tq »

Good lord I'm not spending that on my daily beater lol. I got my asus tablet for $89 at best buy and it works flawlessly with vems. Look up the model and you'll see what it has for reference.
1991 Audi 200q Holset
1991 Audi 200q Felbaum'd
1988 Audi 5000 TQ
User avatar
88a5tq
Posts: 1553
Joined: Wed Jul 16, 2014 10:27 pm

Re: Tablet size for display?

Post by 88a5tq »

BTW has anyone noticed that when using vemsdisplay for the first time on a new tablet or phone that it won't connect under v3 mode, for logging purposes, without first connecting under AIM mode at least once?
1991 Audi 200q Holset
1991 Audi 200q Felbaum'd
1988 Audi 5000 TQ
User avatar
PRY4SNO
Posts: 2430
Joined: Sun Mar 03, 2013 5:14 pm
Location: Edmonton, AB

Re: Tablet size for display?

Post by PRY4SNO »

I'd want solid Bluetooth connectivity and USB charging so I can use the Vems stuff, log and stream music stored on the hard drive. Might as well use the HD for something useful... logs don't take up much room.
Find me on Instagram @pry4sno

|| 2010 Golf Sportwagen TDI /// #farmenwagen
|| 2002 Dodge Ram 2500 24vt 4x4 #bertancummins
|| 1992 80 quattro 20v /// Eventual AAN'd Winter Sled
|| 1990 Coupe quattro /// Because Racecar
User avatar
Mcstiff
Posts: 2003
Joined: Wed Feb 27, 2013 4:16 pm
Location: Erie, CO

Re: Tablet size for display?

Post by Mcstiff »

pilihp2 wrote:
alxdgr8 wrote:
pilihp2 wrote:I Need That AIM dash.


:drool:


Only $2600!


Yeah that google search sure hurt. :wah:


Yeah, it's a kick in the pp :hide:

I still want one, even though it's 75% the same as a tablet.
Post Reply