What did you do today?
What did you do today? *Sticky?*
- Dan McBoost
- Posts: 131
- Joined: Wed Mar 23, 2016 5:04 pm
What did you do today? *Sticky?*
Just a topic that can keep people in the loop of our random crap.
What did you do today?
What did you do today?
Dan McBoost
Supras: ● 87T ● 87T ● 1/2 of an 87T ● 85P
Other: ● 06 Sequoia 4X4 ● 04 Evo8 ● 91 Celica Alltrac ● 90 JDM MR2 GT ● 78 Toyota Pickup
Audis: ● 11 Q7 S line ● 09 A6 Avant 3.0T ● 97 A8Q ● 90 CQ ● 85 4000Q
Supras: ● 87T ● 87T ● 1/2 of an 87T ● 85P
Other: ● 06 Sequoia 4X4 ● 04 Evo8 ● 91 Celica Alltrac ● 90 JDM MR2 GT ● 78 Toyota Pickup
Audis: ● 11 Q7 S line ● 09 A6 Avant 3.0T ● 97 A8Q ● 90 CQ ● 85 4000Q
- speeding-g60
- Posts: 2152
- Joined: Fri Mar 01, 2013 10:46 am
Re: What did you do today? *Sticky?*
well, the culmination of the last couple days.
i dropped the dogbox due to a "noise" i did not appreciate.
couldnt direct source the noise, so i cut open a spare bellhousing and center section, assembled the gears in it (after much grinding to go from narrow first center to wide first spec) and discovered the offender.
spent time fixing and now its done.
and fixed, after disassemble/grind/reassemble three more times. i chucked the reverse gear up in the lathe using a bolt thru the center then took a grinder to it. i won.
i dropped the dogbox due to a "noise" i did not appreciate.
couldnt direct source the noise, so i cut open a spare bellhousing and center section, assembled the gears in it (after much grinding to go from narrow first center to wide first spec) and discovered the offender.
spent time fixing and now its done.
and fixed, after disassemble/grind/reassemble three more times. i chucked the reverse gear up in the lathe using a bolt thru the center then took a grinder to it. i won.
Re: What did you do today? *Sticky?*
"If you can't find one, make one"
Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
-
frostyflax17
- Posts: 177
- Joined: Sat Mar 02, 2013 10:58 am
- Location: Cental NY
- Contact:
Re: What did you do today? *Sticky?*
i'm building a bridge... out of logs... over a 30' gap.
Cory
11 Touareg TDI - Daily
91 CQ - Lifted Rallyx Mudder
90 CQ - 3.0T Rombotis
90 CQ - Wannabe S2
91 200 3b - restore and sell
86 Yamaha Fazer - Cafe Conversion

11 Touareg TDI - Daily
91 CQ - Lifted Rallyx Mudder
90 CQ - 3.0T Rombotis
90 CQ - Wannabe S2
91 200 3b - restore and sell
86 Yamaha Fazer - Cafe Conversion

- audifreakjim
- Posts: 2144
- Joined: Sun Mar 03, 2013 3:00 pm
Re: What did you do today? *Sticky?*
Installing an afterburner 

Re: What did you do today? *Sticky?*
Would be interesting to hear the results. Just a heatshield or...? Lol idk. Everyone used to say go for PTP because they were awesome and had great customer service. Of course I called about a warrantied replacement and instead of them helping, they snuck away and let my warranty run out. Mine is falling apart and PTP customer svc BLOWS!audifreakjim wrote:Installing an afterburner
I did put the bigger holset in today tho
1991 Audi 200q Holset
1991 Audi 200q Felbaum'd
1988 Audi 5000 TQ
1991 Audi 200q Felbaum'd
1988 Audi 5000 TQ
Re: What did you do today? *Sticky?*
Took delivery of this. And now I have to fly to Texas for a month without even getting to use it
-Chris
'91 Audi 200 20v - Revver/BAT project
'91 Audi 200 20v Avant
'01 Anthracite M5
'90 M3
'85 Euro 635csi
'12 X3
E34 530i (maybe rear-mount soon)
'91 Audi 200 20v - Revver/BAT project
'91 Audi 200 20v Avant
'01 Anthracite M5
'90 M3
'85 Euro 635csi
'12 X3
E34 530i (maybe rear-mount soon)
- Dan McBoost
- Posts: 131
- Joined: Wed Mar 23, 2016 5:04 pm
Re: What did you do today? *Sticky?*
Spent the weekend restoring a play house/swing set to reveal it for my daughters birthday on Friday. Also tinkered with the MR2 a tad (not enough) and broke the volvo (solenoild failure).
Dan McBoost
Supras: ● 87T ● 87T ● 1/2 of an 87T ● 85P
Other: ● 06 Sequoia 4X4 ● 04 Evo8 ● 91 Celica Alltrac ● 90 JDM MR2 GT ● 78 Toyota Pickup
Audis: ● 11 Q7 S line ● 09 A6 Avant 3.0T ● 97 A8Q ● 90 CQ ● 85 4000Q
Supras: ● 87T ● 87T ● 1/2 of an 87T ● 85P
Other: ● 06 Sequoia 4X4 ● 04 Evo8 ● 91 Celica Alltrac ● 90 JDM MR2 GT ● 78 Toyota Pickup
Audis: ● 11 Q7 S line ● 09 A6 Avant 3.0T ● 97 A8Q ● 90 CQ ● 85 4000Q
Re: What did you do today? *Sticky?*
More wiring work on my 20vt 80. I'll be so happy when that part is done!
"If you can't find one, make one"
Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
- ringbearer
- Posts: 1282
- Joined: Wed Feb 27, 2013 12:50 pm
- Location: Nor-Cal
Re: What did you do today? *Sticky?*
Went to the beach 
Re: What did you do today? *Sticky?*
Continued flushing this out... little too much coolant in the oil


Re: What did you do today? *Sticky?*
Finished pulling all 4 cams to inspect the 16 rockers on my ST4's 916 motor (chrome flaking is a common problem). All are good, just have to put it all back together and adjust the 16 rockers...
2016-04-18_10-53-22 by Vex Art, on Flickr
2016-04-18_10-53-22 by Vex Art, on Flickr-Alex-
@vexartmedia @odd.cylinders @5cylinder_porsche
Odd Cylinders YouTube Page
1992 Porsche 968 (07K transplant in progress)
1983 Aud UrQ (MC1, GT2871R, IIc)
1985 Audi 4kq
2003 Audi S8 (Avus/Oxblood; DD; 6MT swap)
@vexartmedia @odd.cylinders @5cylinder_porsche
Odd Cylinders YouTube Page
1992 Porsche 968 (07K transplant in progress)
1983 Aud UrQ (MC1, GT2871R, IIc)
1985 Audi 4kq
2003 Audi S8 (Avus/Oxblood; DD; 6MT swap)
- Dan McBoost
- Posts: 131
- Joined: Wed Mar 23, 2016 5:04 pm
Re: What did you do today? *Sticky?*
replaced the failed starter in my volvo. If only my back wasnt already sore...
Dan McBoost
Supras: ● 87T ● 87T ● 1/2 of an 87T ● 85P
Other: ● 06 Sequoia 4X4 ● 04 Evo8 ● 91 Celica Alltrac ● 90 JDM MR2 GT ● 78 Toyota Pickup
Audis: ● 11 Q7 S line ● 09 A6 Avant 3.0T ● 97 A8Q ● 90 CQ ● 85 4000Q
Supras: ● 87T ● 87T ● 1/2 of an 87T ● 85P
Other: ● 06 Sequoia 4X4 ● 04 Evo8 ● 91 Celica Alltrac ● 90 JDM MR2 GT ● 78 Toyota Pickup
Audis: ● 11 Q7 S line ● 09 A6 Avant 3.0T ● 97 A8Q ● 90 CQ ● 85 4000Q
Re: What did you do today? *Sticky?*
Arranged shipping on the next project car
CURRENT
1995 90 Quattro 20VT - 1987 Porsche 924S - 1979 Porsche 928
PAST
1993 Audi 90 CS Quattro - 1990 CQ - V8 - 1986 Audi Coupe GT - 1995.5 Audi S6 - 1994 Cabriolet - 1993 Audi V8 - 2013 A5 - 2011 A4 Avant - 1986 Maserati Biturbo Spyder
1995 90 Quattro 20VT - 1987 Porsche 924S - 1979 Porsche 928
PAST
1993 Audi 90 CS Quattro - 1990 CQ - V8 - 1986 Audi Coupe GT - 1995.5 Audi S6 - 1994 Cabriolet - 1993 Audi V8 - 2013 A5 - 2011 A4 Avant - 1986 Maserati Biturbo Spyder
Re: What did you do today? *Sticky?*
i approve this postGrillage wrote:Arranged shipping on the next project car
- audifreakjim
- Posts: 2144
- Joined: Sun Mar 03, 2013 3:00 pm
Re: What did you do today? *Sticky?*
I put a similar wrap on from Treadstone on and it started falling apart after the first track event. I pulled it off and the inside had burned off and the rest was a crispy mess. This is just a radiant heat shield. I always had one before, just now getting around to making one for the 07k setup. Got to protect the coils from getting too hot.88a5tq wrote:Would be interesting to hear the results. Just a heatshield or...? Lol idk. Everyone used to say go for PTP because they were awesome and had great customer service. Of course I called about a warrantied replacement and instead of them helping, they snuck away and let my warranty run out. Mine is falling apart and PTP customer svc BLOWS!audifreakjim wrote:Installing an afterburner
I did put the bigger holset in today tho![]()
- Dan McBoost
- Posts: 131
- Joined: Wed Mar 23, 2016 5:04 pm
Re: What did you do today? *Sticky?*
On sunday, I figured our a drainage issue, so...
Moved four blue stone sidewalking pieces at 3-4in thick and the smallest one 4'x4' then dig 25-30cu ft of dirt which was 50% rocks. Then put drainage pipe in and cover with 36 bags of concrete.
I
am
whipped.
Moved four blue stone sidewalking pieces at 3-4in thick and the smallest one 4'x4' then dig 25-30cu ft of dirt which was 50% rocks. Then put drainage pipe in and cover with 36 bags of concrete.
I
am
whipped.
Dan McBoost
Supras: ● 87T ● 87T ● 1/2 of an 87T ● 85P
Other: ● 06 Sequoia 4X4 ● 04 Evo8 ● 91 Celica Alltrac ● 90 JDM MR2 GT ● 78 Toyota Pickup
Audis: ● 11 Q7 S line ● 09 A6 Avant 3.0T ● 97 A8Q ● 90 CQ ● 85 4000Q
Supras: ● 87T ● 87T ● 1/2 of an 87T ● 85P
Other: ● 06 Sequoia 4X4 ● 04 Evo8 ● 91 Celica Alltrac ● 90 JDM MR2 GT ● 78 Toyota Pickup
Audis: ● 11 Q7 S line ● 09 A6 Avant 3.0T ● 97 A8Q ● 90 CQ ● 85 4000Q
Re: What did you do today? *Sticky?*
That sounds as fun as spending 5 hours weeding a 20'x10' bed that was horridly overgrown by crab grass and irises... filled a 65 gallon and 90 gallon garbage can full of junk, and gave away a couple totes full of irises b/c we didn't have enough room for them!Dan McBoost wrote:On sunday, I figured our a drainage issue, so...
Moved four blue stone sidewalking pieces at 3-4in thick and the smallest one 4'x4' then dig 25-30cu ft of dirt which was 50% rocks. Then put drainage pipe in and cover with 36 bags of concrete.
I
am
whipped.
I need to finish the yard work, so I can start on the new toy/project that's patiently waiting in the garage!
- Dan McBoost
- Posts: 131
- Joined: Wed Mar 23, 2016 5:04 pm
Re: What did you do today? *Sticky?*
I did get a work on the MR2 tonight. It is on the road and getting an alignment on Thursday so I needed to get the height finalized. Nice to be working on CARS again. I do really like quiet time in the garage.
I met with a fence guy to get a couple of quotes. I need to see if its worth doing it myself... more digging and concrete may be in the forecast:/
I met with a fence guy to get a couple of quotes. I need to see if its worth doing it myself... more digging and concrete may be in the forecast:/
Dan McBoost
Supras: ● 87T ● 87T ● 1/2 of an 87T ● 85P
Other: ● 06 Sequoia 4X4 ● 04 Evo8 ● 91 Celica Alltrac ● 90 JDM MR2 GT ● 78 Toyota Pickup
Audis: ● 11 Q7 S line ● 09 A6 Avant 3.0T ● 97 A8Q ● 90 CQ ● 85 4000Q
Supras: ● 87T ● 87T ● 1/2 of an 87T ● 85P
Other: ● 06 Sequoia 4X4 ● 04 Evo8 ● 91 Celica Alltrac ● 90 JDM MR2 GT ● 78 Toyota Pickup
Audis: ● 11 Q7 S line ● 09 A6 Avant 3.0T ● 97 A8Q ● 90 CQ ● 85 4000Q
Re: What did you do today? *Sticky?*
Went for a ride in this.




Scratch another one off the list...
Sent from my SAMSUNG-SM-G870A using Tapatalk





Scratch another one off the list...
Sent from my SAMSUNG-SM-G870A using Tapatalk
Re: What did you do today? *Sticky?*
Yesterday I had surgery for appendicitis. Home now, so will see if I can get the bandit running in to for Carlisle.
"If you can't find one, make one"
Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
Dallastown, PA
1991 Audi 80 quattro (20vt project)
1991 Audi Coupe Quattro (project: my first 20v)
2007 Mitsubishi Raider(Dakota in disguise)
2019 Chevy Cruze RS hatch (wife's little red sporty car)
- Dan McBoost
- Posts: 131
- Joined: Wed Mar 23, 2016 5:04 pm
Re: What did you do today? *Sticky?*
That audi 50! Noms!
Got a buddies car out of my storage garage buy moving 5 of my cars, lol. Had to toss OEM wheels back onto my truck since the MR2 wheels center bore is too small by 2mm or so. Then put the CF lip on the MR2 last night. Today swapped wheels to the allroad (it was recently totaled...) so I can get the newish winter tires off, then toss the dry rotted evo tires on the winter wheels and let them take the car on tuesday. Then wet sanded and buffed the volvo summer wheels I painted. A car filled weekend yay!
Got a buddies car out of my storage garage buy moving 5 of my cars, lol. Had to toss OEM wheels back onto my truck since the MR2 wheels center bore is too small by 2mm or so. Then put the CF lip on the MR2 last night. Today swapped wheels to the allroad (it was recently totaled...) so I can get the newish winter tires off, then toss the dry rotted evo tires on the winter wheels and let them take the car on tuesday. Then wet sanded and buffed the volvo summer wheels I painted. A car filled weekend yay!
Dan McBoost
Supras: ● 87T ● 87T ● 1/2 of an 87T ● 85P
Other: ● 06 Sequoia 4X4 ● 04 Evo8 ● 91 Celica Alltrac ● 90 JDM MR2 GT ● 78 Toyota Pickup
Audis: ● 11 Q7 S line ● 09 A6 Avant 3.0T ● 97 A8Q ● 90 CQ ● 85 4000Q
Supras: ● 87T ● 87T ● 1/2 of an 87T ● 85P
Other: ● 06 Sequoia 4X4 ● 04 Evo8 ● 91 Celica Alltrac ● 90 JDM MR2 GT ● 78 Toyota Pickup
Audis: ● 11 Q7 S line ● 09 A6 Avant 3.0T ● 97 A8Q ● 90 CQ ● 85 4000Q
Re: What did you do today? *Sticky?*
That 50 is so awesome
Just typical Allroad bullshit today. Rotors and pads turned into seized pistons and incorrect pads, lol. Should finish the "quick afternoon job" Tuesday when the real pads and rebuild kits come.
Just typical Allroad bullshit today. Rotors and pads turned into seized pistons and incorrect pads, lol. Should finish the "quick afternoon job" Tuesday when the real pads and rebuild kits come.
Matt
18 Silverado 1500 work pig, roof rack and tonneau cover
11 Jetta sedan TDI DSG, rear muffler delete
GONE :( 87 4ktq - 4 FOX SNAKES

18 Silverado 1500 work pig, roof rack and tonneau cover
11 Jetta sedan TDI DSG, rear muffler delete
GONE :( 87 4ktq - 4 FOX SNAKES

Stopped a Fire from Expanding...
Was reminded that oil is flammable... and that the stock placement of the PCV system on the AAN block sucks when launching...
So now I'm looking for the underhood heat liner, a suitable air filter, and possibly a new 2.0t harness....
Along with planning for a catchcan system and some ideas for heat shielding and ducting as I'm also having coils that are getting easily heat-soaked





So now I'm looking for the underhood heat liner, a suitable air filter, and possibly a new 2.0t harness....
Along with planning for a catchcan system and some ideas for heat shielding and ducting as I'm also having coils that are getting easily heat-soaked





UglyUr 2.5L 95.5mm Stroker

Rubi PTE6062 Gen 2 Screamer

Rubi PTE6062 Gen 2 Screamer
Re: What did you do today? *Sticky?*
Well that's not cool at all. Did a hose clamp come loose or something? I was actually sent an UrS4 catch can kit from 034 by accident (when I requested the crank case breather hoses for a 200 20v). I haven't had the time to do anything about it. Want it?
-Chris
'91 Audi 200 20v - Revver/BAT project
'91 Audi 200 20v Avant
'01 Anthracite M5
'90 M3
'85 Euro 635csi
'12 X3
E34 530i (maybe rear-mount soon)
'91 Audi 200 20v - Revver/BAT project
'91 Audi 200 20v Avant
'01 Anthracite M5
'90 M3
'85 Euro 635csi
'12 X3
E34 530i (maybe rear-mount soon)



