86 B2 Coupe GT partial part out

Buy and Sell your parts here
Post Reply
User avatar
mpyatov
Posts: 28
Joined: Tue Sep 02, 2014 4:43 pm
Location: Stewartstown, PA

86 B2 Coupe GT partial part out

Post by mpyatov »

Hey guys! I bought a second CGT about 6 or so months ago because it fell into my lap for dirt cheap. So at this point I yanked the engine, junked the auto trans because, well, it's an auto, took the driver's side door panel and window regulator and also the drivers side taillight circuit board. I'll post pictures as soon as I can get over to my friend's (where the car is being held for me) of what's left and in what condition its in. The only things that I'm not willing to let go of are the wheels, head light housings, tail light housings, subframe and steering rack. I guess just let me know what you need and I'll let you know if I can get it for you. i'm also willing to sell off ALL OF THE GLASS except THE WINDSHIELD! The glass will also fit a urQuattro. So PM me if you need anything! I know how much of a bitch it is to find parts for B2s so I want to help out the 4ring community!
Image
______________________
01 Ram 1500 (The Battering Ram)
85 Audi CGT (Mieke)
86 Audi CGT (Agatha)
79 BMW 320 (Ingrid)
73 Mercedes 220 (Karin)
carl
Posts: 154
Joined: Thu Mar 07, 2013 11:05 am

Re: 86 B2 Coupe GT partial part out

Post by carl »

What happened to the old driver's side window regulator, still have it?
User avatar
IslandRinger
Posts: 80
Joined: Thu Dec 03, 2015 11:42 pm
Location: Victoria, BC, Canada

Re: 86 B2 Coupe GT partial part out

Post by IslandRinger »

Looking for headlamp switch. Also, may be interested in PS arm rest with the hardware.

Sent from my Nexus 4 using Tapatalk
Tarpan (Victoria, BC)
Stable:
2017 VW Golf Sportwagen 1.8T [DD/Family Wagen]
1996 Audi UrS6 [The Ongoing Project]

1986 Audi Coupe GT [SOLD]
User avatar
alxdgr8
Posts: 1056
Joined: Thu Feb 28, 2013 1:39 am
Location: Seattle, WA

Re: 86 B2 Coupe GT partial part out

Post by alxdgr8 »

I could use the carpet, but shipping across the US would probably be killer :(
-Alex-
@vexartmedia @odd.cylinders @5cylinder_porsche
Odd Cylinders YouTube Page
1992 Porsche 968 (07K transplant in progress)
1983 Aud UrQ (MC1, GT2871R, IIc)
1985 Audi 4kq
2003 Audi S8 (Avus/Oxblood; DD; 6MT swap)
User avatar
alxdgr8
Posts: 1056
Joined: Thu Feb 28, 2013 1:39 am
Location: Seattle, WA

Re: 86 B2 Coupe GT partial part out

Post by alxdgr8 »

What's the trim on the doors look like? Noticed mine are starting to get wavy, wouldn't mind some straight ones.
-Alex-
@vexartmedia @odd.cylinders @5cylinder_porsche
Odd Cylinders YouTube Page
1992 Porsche 968 (07K transplant in progress)
1983 Aud UrQ (MC1, GT2871R, IIc)
1985 Audi 4kq
2003 Audi S8 (Avus/Oxblood; DD; 6MT swap)
User avatar
mpyatov
Posts: 28
Joined: Tue Sep 02, 2014 4:43 pm
Location: Stewartstown, PA

Re: 86 B2 Coupe GT partial part out

Post by mpyatov »

Here are a few pics. If anyone needs any pics of anything specific let me know!

Image

Image

Crap quality but it's the CIS distributor and the original airbox, throttle plate etc
Image

Image

Image

Image

carl wrote:What happened to the old driver's side window regulator, still have it?

I swapped it into my daily driver, I still another motor that works but the cable on the old regulator got jammed in the motor and bent the bar. I resurfaced the plastic wheel on the inside when I initially wanted to rebuild the old regulator but ended up getting the parts car before that.

IslandRinger wrote:Looking for headlamp switch. Also, may be interested in PS arm rest with the hardware.

Sent from my Nexus 4 using Tapatalk

I'm sure I could pull them for ya next time I'm there. I'll dm you once I do in the next week or so.

alxdgr8 wrote:I could use the carpet, but shipping across the US would probably be killer :(

Do you mean the actual main salon carpet? There's a small tear where the handbrake assembly sits, but it is covered by the stock handbrake boot. I get pretty good rates on shipping, I used to work for a forwarding company that still lets me use their shipping rates, basically a big discount on USPS.

alxdgr8 wrote:What's the trim on the doors look like? Noticed mine are starting to get wavy, wouldn't mind some straight ones.

Previous owner hacked into the panels to install speakers in the doors and did a pretty shit job, but most of the actual plastic trim seemed alright I can take some close ups sometime this week
Image
______________________
01 Ram 1500 (The Battering Ram)
85 Audi CGT (Mieke)
86 Audi CGT (Agatha)
79 BMW 320 (Ingrid)
73 Mercedes 220 (Karin)
User avatar
alxdgr8
Posts: 1056
Joined: Thu Feb 28, 2013 1:39 am
Location: Seattle, WA

Re: 86 B2 Coupe GT partial part out

Post by alxdgr8 »

Looking for the trim on the center of the outside of the door.

Sent from my Nexus 6P using Tapatalk
-Alex-
@vexartmedia @odd.cylinders @5cylinder_porsche
Odd Cylinders YouTube Page
1992 Porsche 968 (07K transplant in progress)
1983 Aud UrQ (MC1, GT2871R, IIc)
1985 Audi 4kq
2003 Audi S8 (Avus/Oxblood; DD; 6MT swap)
User avatar
mpyatov
Posts: 28
Joined: Tue Sep 02, 2014 4:43 pm
Location: Stewartstown, PA

Re: 86 B2 Coupe GT partial part out

Post by mpyatov »

alxdgr8 wrote:Looking for the trim on the center of the outside of the door.

Sent from my Nexus 6P using Tapatalk

Passenger side has already been sold, drivers side is still available.
Image
______________________
01 Ram 1500 (The Battering Ram)
85 Audi CGT (Mieke)
86 Audi CGT (Agatha)
79 BMW 320 (Ingrid)
73 Mercedes 220 (Karin)
User avatar
IslandRinger
Posts: 80
Joined: Thu Dec 03, 2015 11:42 pm
Location: Victoria, BC, Canada

Re: 86 B2 Coupe GT partial part out

Post by IslandRinger »

Also looking for: steering column clamshell(?), Passenger side interior door arm rest and mounting hardware, seat tilt cables, and potentially interested in CIS distributor.

Sent from my Nexus 4 using Tapatalk
Tarpan (Victoria, BC)
Stable:
2017 VW Golf Sportwagen 1.8T [DD/Family Wagen]
1996 Audi UrS6 [The Ongoing Project]

1986 Audi Coupe GT [SOLD]
Post Reply